iPhone Parts - Page 23

Replace the plastic frame for the loudspeaker opening compatible with the iPhone X. Fits between the loudspeaker and the opening at the bottom right of the rear case.

Replace the plastic camera alignment frame adhered to the inside of the front panel of your smartphone.

Replace the black shield sticker covering the back side of the logic board compatible with iPhone X.

Replace the adhesive foam gasket that fits between the lightning port socket and the center opening in the rear case compatible with the iPhone X.

Replace the mesh that covers the earpiece speaker opening compatible with the iPhone X model #A1865, A1901, A1902.

Replace the adhesive backed foam spacer adhered to the lower end EMI grounding bracket that presses on the vibration motor connector in an iPhone X. Set of five foam pads.

Replace the adhesive backed foam spacer for the front-facing cameras in an iPhone X. Set of five foam pads.

Replace the adhesive backed foam spacer on the rear-facing main camera assembly compatible with the iPhone X.

Replace the internal inductive charging coil compatible with the A1865, A1901, A1902 model iPhone X. Installing this part requires micro-soldering.

Replace the one large and three small adhesive backed foam spacer pads on the main part of the logic board connector bracket in an iPhone X. Set of 4 pads.

Replace the adhesive backed black graphite heat dissipation sticker on the back of the logic board connector bracket compatible with iPhone X.

Replace the conductive adhesive securing the three cables from the front-facing camera assembly. One set of three adhesive strips.

Replace the two adhesive backed black conductive foam spacers at the top of the rear case of an iPhone X. 5 pairs of pads.

Replace the adhesive backed foam spacer on the microphone that is part of the lightning connector assembly compatible with the iPhone X. Includes a set of 5 pads.

Replace the adhesive backed foam spacer on the induction flex cable in an iPhone X. Set of 5 pads.

This test cable simplifies connecting and testing OLED displays and digitizers for the iPhone X.

Fix problems with vibration alerts and haptic feedback with this replacement linear oscillating vibrator.

Replace the Wi-Fi and Bluetooth Antenna compatible with the model A1865, A1901, A1902 iPhone X smartphone. Part #721-00051.

Replace a damaged or corroded lower end interconnect cable. This part is compatible with an iPhone X.

Fix an unresponsive power button or malfunctioning flash with this replacement assembly.

Replace a broken or scratched rear panel with this new blank aftermarket rear panel compatible with the iPhone 8 Plus.

Replace the antenna cable in the top center of the rear case compatible with iPhone 8 Plus model #A1864, A1897, A1898 smartphone.

We live to share gadget guts with the world. Now you can show off the insides of your iPhone 8 Plus with a new Insight iPhone Teardown Case.

Replace a metal bracket that secures and reinforces the lighting port assembly compatible with the iPhone 8 Plus.