iPhone 7 Plus battery replacement kit. 100% factory tested, 2900 mAh high-quality battery. No soldering required. Compatible with all iPhone 7 Plus models (not iPhone 7).

Replace a home button compatible with the iPhone 7, iPhone 7 Plus, iPhone 8, iPhone 8 Plus, and iPhone SE 2020.

Replace a screen compatible with iPhone 7 Plus. Includes all of the small parts preinstalled in the assembly. 5.5 inch 1080 x 1920 pixel IPS LCD Display.

Charge or sync lightning port equipped portable Apple devices

Replace a lightning connector, two microphones, and cellular antenna compatible with the iPhone 7 Plus. Fix problems with charging, USB device connectivity, and audio recording. Part #821-00276-05.

This custom cut adhesive film secures the front screen display assembly to the case of an iPhone 7 Plus. A1661, A1784, A1785, A1786 models.

Replace the linear oscillating vibrator compatible with the iPhone 7 Plus.

This replacement rear case includes no internal components and has no logo or text.

This set of exterior case buttons includes the Power/Lock Button, Volume Buttons, and Vibrate/Ring Switch.

Replace the two gold-colored conductive adhesive areas on the flex cable of the lightning connector assembly compatible with the iPhone 7 Plus.

Replace an external lens cover for the rear-facing cameras compatible with iPhone 7 Plus. Includes the metal bezel ring.

Replace a front glass digitizer panel and 5.5" 1080 x 1920 pixel LCD display compatible with the iPhone 7 Plus smartphone model A1661, A1784, A1785, A1786. Includes the Front Plastic and Metal Frame.

Replace a loudspeaker compatible with the iPhone 7 Plus. Fix issues with speakerphone and audio output.

Replace an earpiece speaker compatible with the iPhone 7 Plus model #A1661, A1784, A1785, A1786. Fix problems with phone call audio.

Replace the antenna cable in the top center of the rear case compatible with the iPhone 7 Plus model A1661, A1784, A1785, A1786.

We live to share gadget guts with the world. Now you can show off the insides of your iPhone 7 Plus with a new Insight iPhone Teardown Case.

Replace the Wi-Fi antenna and cable that is adhered to the loudspeaker in the lower right corner inside the rear case compatible with the iPhone 7 Plus model #1661, A1784, A1785, A1786. Part #821-00663.

Replace the adhesive backed elastic gasket for the loudspeaker opening compatible with the iPhone 7 Plus. Includes a set of 5 gaskets.

Replace the adhesive backed foam pad between the rear-facing cameras and the rear case compatible with the iPhone 7 Plus. Includes a set of 5 gaskets.

Replace the mesh covers for the speaker, vent, and microphone openings. Mesh covers are part of the water and dust ingress protection for the phone.

Replace the backlight film on the display assembly of your smartphone. This part requires micro soldering.

This tray holds the nano SIM card and is inserted on the side of the phone.

Replace the black adhesive that secures the LCD IC and cable to the LCD shield plate compatible with the iPhone 7 Plus model A1661, A1784, A1785, A1786 smartphone. Includes a set of 5 stickers.

Replace the adhesive backed foam spacer on the back of the battery cable connector in an iPhone 7 Plus. Set of 5 pads.