iPhone Parts - Page 25

Replace a bent or missing metal bracket that secures the connector for the front-facing camera and front panel sensor cable as well as the rear-facing camera connector to the logic board.

Replace a bent or missing metal bracket that secures the battery connector and two lower display cable connectors to the logic board.

Replace the backlight film on the display assembly. This part requires micro soldering.

Replace the clear plastic frame for the proximity sensor on the back of the display assembly of your smartphone.

Replace a internal inductive charging coil compatible with the model A1863, A1905, A1906 iPhone 8. Fix problems with wireless charging.

Replace the wireless charging antenna cable connector on the logic board compatible with the iPhone 8 and 8 Plus. Installing this part requires micro-soldering.

Replace a damaged or corroded battery cable connector on the logic board of an iPhone 8, iPhone 8 Plus, or iPhone X. This part requires microsoldering.

Replace the antenna cable in the top center of the rear case compatible with the iPhone 7 Plus model A1661, A1784, A1785, A1786.

We live to share gadget guts with the world. Now you can show off the insides of your iPhone 7 Plus with a new Insight iPhone Teardown Case.

This replacement rear case includes no internal components and has no logo or text.

Replace the Wi-Fi antenna and cable that is adhered to the loudspeaker in the lower right corner inside the rear case compatible with the iPhone 7 Plus model #1661, A1784, A1785, A1786. Part #821-00663.

Replace the adhesive backed elastic gasket for the loudspeaker opening compatible with the iPhone 7 Plus. Includes a set of 5 gaskets.

Replace the backlight film on the display assembly of your smartphone. This part requires micro soldering.

This tray holds the nano SIM card and is inserted on the side of the phone.

Replace the black adhesive that secures the LCD IC and cable to the LCD shield plate compatible with the iPhone 7 Plus model A1661, A1784, A1785, A1786 smartphone. Includes a set of 5 stickers.

Replace the adhesive backed foam spacer on the back of the battery cable connector in an iPhone 7 Plus. Set of 5 pads.

Replace the adhesive backed foam spacer on the back of the logic board connector for the lightning port assembly compatible with the iPhone 7 Plus. Includes a set of 5 pads.

Replace a damaged or malfunctioning internal audio or power switch and brackets.

Replace the gasket that seals the earpiece speaker mesh bracket assembly against the back of the earpiece speaker compatible with the iPhone 7 Plus model #A1661, A1784, A1785, A1786.

Replace the earpiece speaker plastic bracket, speaker gasket, opening mesh, and its adhesive on the inside of the front panel assembly compatible with the iPhone 7 Plus model #A1661, A1784, A1785, A1786.

Replace the antenna in the top left of the rear case compatible with the iPhone 7 Plus smartphone model #A1661, A1784, A1785, A1786.

Replace the set of six retaining clips in the edges of the rear case that help hold the front panel assembly in place.

This metal bracket secures the front panel assembly cables and the battery cable to the logic board.

This metal bracket secures the camera flash to the rear case.