Fix a dead battery with this replacement 2942 mAh battery.

Fix a dead battery with this replacement 2942 mAh battery.

Replace a screen compatible with iPhone XR. Includes all of the small parts pre-installed in the assembly, saving time and increasing the quality of your repair. 6.1 inch IPS LCD 828 x 1792 Display.

Replace a screen compatible with iPhone XR. Includes all of the small parts pre-installed in the assembly, saving time and increasing the quality of your repair. 6.1 inch IPS LCD 828 x 1792 Display.

Protect the display on your iPhone XR or iPhone 11 from scratches.

This custom cut adhesive film secures the front screen display assembly to the case of an iPhone XR smartphone. Models A1984, A2105, A2106, A2108.

Charge or sync lightning port equipped portable Apple devices

Charge or sync lightning port equipped portable Apple devices

Flexible LCD holder

Replace a lightning connector and two microphones compatible with the iPhone XR. Part #821-01702. Includes the flex cable, logic board connector, lightning connector socket, and two microphones.

Replace the adhesive foam gasket that fits between the loudspeaker and the speaker opening in the rear case compatible with iPhone XR and iPhone 11. This gasket helps seal liquid and dust out of the device.

Replace a broken or scratched rear panel with this new blank aftermarket rear panel compatible with iPhone XR.

Replace a malfunctioning earpiece speaker with the attached sensors and fix problems with phone call audio.

This adhesive film secures the battery to the rear case compatible with the iPhone XR smartphone model A1984, A2105, A2106, A2108.

We live to share gadget guts with the world. Now you can show off the insides of your iPhone XR with a new Insight iPhone Teardown Case.

Replace a loudspeaker compatible with the iPhone XR. Fix speakerphone and audio output.

Replace an earpiece speaker compatible with the iPhone XR model #A1984, A2105, A2106, A2108 smartphone. Fix problems with phone call audio.

Replace a bent or missing dual SIM card tray for an iPhone XR. This tray holds the nano SIM cards and is inserted on the side of the phone.

Replace the internal inductive charging coil compatible with the A1984, A2105, A2106, A2108 model iPhone XR. Installing this part requires micro-soldering.

Replace a malfunctioning front-facing camera assembly and restore selfie camera functions.

Replace a dirty, corroded, or bent SIM card tray socket and card reader for a dual SIM model iPhone XR.

Replace a damaged or corroded lower end interconnect cable.

Replace a dirty, corroded, or bent SIM card tray socket and card reader for a single SIM model iPhone XR.

Replace the metallic shield sticker on the back side of the display cable. This part is compatible with an iPhone XR.