Grab a toolkit for your iPhone 6 model and fix your broken phone!
iFixit has you covered with parts, tools, and free repair guides. Repair with confidence! All of our replacement parts are tested to rigorous standards and backed by our industry-leading warranty.
Replace a screen compatible with iPhone 6. Includes all of the small parts pre-installed in the assembly, saving time and increasing the quality of your repair. 4.7 inch 750 x 1334 pixel IPS LCD Display.
Replace the adhesive film that secures the battery to the rear case compatible with the iPhone 6, iPhone 6s, and iPhone 7 smartphone models A1549, A1586, A1589, A1633, A1688, A1700, A1660, A1778, A1779, A1780.
Replace a lightning connector or headphone jack compatible with iPhone 6. Includes cellular antenna and microphone to save time on repair. Model A1549, A1586, A1589. Part #821-1853.
Replace a home button assembly compatible with the iPhone 6 or 6 Plus. Includes the home button, metal ring home button bezel, and home button cable. Part #2441-06.
Replace a front camera and sensor cable compatible with the iPhone 6. Includes the front-facing camera, secondary microphone, ambient light and proximity sensors. Part #821-2172.
Replace the cable that connects the home button assembly to the logic board compatible with the iPhone 6. This cable follows a channel in the LCD shield plate.
Replace the adhesive gasket ring on the lens end of the front-facing camera of an iPhone 5, 5s, 5c, SE (1st Gen), 6, 6 Plus, 6s, or 6s Plus. Set of 5 gaskets.
Replace a scratched or missing exterior case button for your iPhone 6. The set includes the power/lock button, volume buttons, and vibrate/ring switch.
Replace the power button cable on your iPhone 6 to fix and unresponsive power button. This cable assembly includes the internal power/lock button switch and the camera flash.
Replace a punctured or missing mesh and plastic bezel covering the earpiece speaker opening compatible with the iPhone 6 or 6 Plus. Keep dust and dirt from blocking the earpiece speaker.
Replace a metal bracket that secures the home button assembly to the inside of the display compatible with the iPhone 6 or 6 Plus. Fix an unresponsive home button.