Replace a 1624 mAh battery compatible with a 1st generation iPhone SE. 3.82 Volts (V), 6.21 Watt Hours (Wh). This replacement does not require soldering.
Replace a screen compatible with a 1st generation iPhone SE. Includes all of the small parts pre-installed in the assembly, saving time and increasing the quality of your repair. 4.0 inch 640 x 1136 pixel IPS LCD Display.
Replace the adhesive film that secures the battery to the rear case compatible with the iPhone 5s, iPhone 5c, and 1st generation iPhone SE model smartphone. Part #923-0575.
Replace a home button assembly compatible with the iPhone 5s and 1st generation iPhone SE. Includes the home button, home button cable, and home button metal ring. Part #821-1648.
iPhone SE (1st Gen) Audio Control and Power Button Cable
Replace the internal power/lock, volume, and the vibrate/ring switches along with the cable and the power contacts for the vibrator. Compatible with 1st generation iPhone SE models.
Replace the adhesive gasket ring on the lens end of the front-facing camera of an iPhone 5, 5s, 5c, SE (1st Gen), 6, 6 Plus, 6s, or 6s Plus. Set of 5 gaskets.
iPhone SE (1st Gen) Test Cable for Lightning Connector
This test cable simplifies connecting multiple lightning connector assemblies compatible with a 1st generation iPhone SE. Indispensable to anyone who makes multiple 1st generation iPhone SE repairs.
iPhone SE (1st Gen) Lightning Connector and Headphone Jack
This lightning connector assembly includes the lightning connector, primary microphone, and headphone jack and is compatible with 1st generation iPhone SE models.
iPhone 5s/SE (1st Gen) Home Button Spring Contact Backing
Replace the captive phillips screw, spring contact, and adhesive backing from the home button assembly compatible with an iPhone 5s or 1st generation SE.
iPhone 5s/SE (1st Gen) Rear Camera Cable Connector Foam Pads
Replace the adhesive backed foam spacer on the back of the rear-facing camera cable connector compatible with the iPhone 5s or 1st generation SE. Includes a set of 5 pads.
iPhone 5s/SE (1st Gen) Front Panel Assembly Cable Bracket
Replace a bent or missing metal bracket securing the front panel assembly cable connectors to the logic board in an iPhone 5s or 1st generation iPhone SE.