iPhone Parts - Page 26

Replace the antenna in the top left of the rear case compatible with the iPhone 7 Plus smartphone model #A1661, A1784, A1785, A1786.

Replace the set of six retaining clips in the edges of the rear case that help hold the front panel assembly in place.

This metal bracket secures the front panel assembly cables and the battery cable to the logic board.

This metal bracket secures the camera flash to the rear case.

Replace a bent or missing metal bracket that secures the earpiece speaker to the back of the display assembly compatible with the iPhone 7 Plus model #A1661, A1784, A1785, A1786.

Replace the custom cut adhesive film that secures the earpiece speaker anti-dust mesh bracket to the front panel compatible with the iPhone 7 Plus model #A1661, A1784, A1785, A1786.

Replace the plastic bracket that holds the earpiece speaker opening mesh in place against the inside of the front panel assembly compatible with iPhone 7 Plus model #A1661, A1784, A1785, A1786.

This set of exterior case buttons includes the Power/Lock Button, Volume Buttons, and Vibrate/Ring Switch.

Replace a scratched or missing camera flash diffuser lens.

Replace the mesh that covers the earpiece speaker opening compatible with the iPhone 7 Plus model #A1661, A1784, A1785, A1786.

These plastic guides center the front-facing camera and the ambient light sensor over the openings in the front glass panel.

Replace a front camera and sensor cable compatible with the iPhone 7 Plus. Includes the front-facing camera, one microphone, and the proximity sensor. Part #821-00519-03.

This test cable simplifies connecting and testing LCDs and digitizers for the iPhone 7 Plus.

Replace the antenna contact assembly in the top right of the rear case compatible with the iPhone 7 model #A1660, A1778, A1779, A1780. Fix Wi-Fi connectivity problems.

We live to share gadget guts with the world. Now you can show off the insides of your iPhone 7 with a new Insight iPhone Teardown Case.

Replace a bent or missing metal bracket that secures the power switch to the inside of the rear case.

Replace a bent or missing metal bracket that secures the volume switches to the inside of the rear case.

This replacement rear case compatible with an iPhone 7 includes no internal components and has no logo or text.

Replace the adhesive backed foam pad between the rear-facing camera and the rear case compatible with the iPhone 7. Includes a set of 5 gaskets.

Replace an adhesive backed foam gasket for the lightning port compatible with the iPhone 7.

Replace the adhesive backed foam gasket for the loudspeaker opening compatible with the iPhone 7. Includes a set of 5 gaskets.

Replace a torn or missing gasket on the hold button assembly for an iPhone 7 or iPhone 7 Plus.

Replace a torn or missing gasket on the SIM card tray for an iPhone 7 or iPhone 7 Plus.

Replace the two gold-colored conductive adhesive areas on the flex cable of the lightning connector assembly compatible with the iPhone 7.