This custom cut adhesive film secures the rear panel assembly to the case of an iPhone 16 Pro.

This custom cut adhesive film secures the rear panel assembly to the case of an iPhone 16 Pro Max.

This custom cut adhesive film secures the rear panel assembly to the case of an iPhone 16.

This custom cut adhesive film secures the rear panel assembly to the case of an iPhone 16 Plus.

Replace the adhesive foam gasket that fits between the loudspeaker and the speaker opening in the rear case compatible with iPhone X. This gasket helps seal liquid and dust out of the device.

Replace the adhesive foam gasket that fits between the lightning port socket and the center opening in the rear case compatible with the iPhone X.

Replace the adhesive backed foam spacer adhered to the lower end EMI grounding bracket that presses on the vibration motor connector in an iPhone X. Set of five foam pads.

Replace the adhesive backed foam spacer on the rear-facing main camera assembly compatible with the iPhone X.

Replace the two adhesive backed black conductive foam spacers at the top of the rear case of an iPhone X. 5 pairs of pads.

Replace the adhesive backed foam spacer on the induction flex cable in an iPhone X. Set of 5 pads.

Replace an adhesive backed foam gasket for the lightning port compatible with the iPhone 7.

Replace the adhesive foam gasket that fits between the loudspeaker and the speaker opening in the rear case compatible with iPhone XS. This gasket helps seal liquid and dust out of the device.

Replace the adhesive backed foam spacer for the front-facing cameras in an iPhone X. Set of five foam pads.

Replace the one large and three small adhesive backed foam spacer pads on the main part of the logic board connector bracket in an iPhone X. Set of 4 pads.

Replace the adhesive backed foam spacer on the microphone that is part of the lightning connector assembly compatible with the iPhone X. Includes a set of 5 pads.

Replace the adhesive backed elastic gasket for the loudspeaker opening compatible with the iPhone 7 Plus. Includes a set of 5 gaskets.

Replace the adhesive backed foam pad between the rear-facing cameras and the rear case compatible with the iPhone 7 Plus. Includes a set of 5 gaskets.

Replace the adhesive backed foam spacer on the back of the battery cable connector in an iPhone 7 Plus. Set of 5 pads.

Replace the adhesive backed foam spacer on the back of the logic board connector for the lightning port assembly compatible with the iPhone 7 Plus. Includes a set of 5 pads.

Replace the adhesive backed foam pad between the rear-facing camera and the rear case compatible with the iPhone 7. Includes a set of 5 gaskets.

Replace the adhesive backed foam gasket for the loudspeaker opening compatible with the iPhone 7. Includes a set of 5 gaskets.

Replace the adhesive backed foam spacer on the back of the logic board connector for the audio control and power button cable in an iPhone 7. Set of 5 pads.

Replace the adhesive backed foam spacer on the back of the digitizer cable connector in an iPhone 6s Plus. Set of 5 pads.

Replace the adhesive backed foam spacer on the back of the rear-facing camera cable connector compatible with the iPhone 6. Includes a set of 5 pads.