iPhone Parts - Page 20

Replace a scratched or missing exterior case button face including the Power/Lock Button, Volume Buttons, and Vibrate/Ring Switch.

Replace a triple 12 MP rear-facing camera assembly compatible with the iPhone 11 Pro and 11 Pro Max. Fix sensor and focusing issues.

Fix problems with vibration alerts and haptic feedback with this replacement linear oscillating vibrator.

Replace the plastic camera alignment frame adhered to the inside of the front panel of your smartphone.

Replace the adhesive gasket that fits between the charging port and the opening in the rear case compatible with iPhone 11. This gasket helps seal liquid and dust out of the device.

Replace a bent or missing SIM card tray for a dual SIM model iPhone 11. This tray holds the nano SIM cards and is inserted on the side of the phone.

Replace a Bluetooth antenna compatible with the A2111, A2221, and A2223 model iPhone 11 smartphone. Fix unreliable connectivity Bluetooth devices.

Replace a dirty, corroded, or bent SIM card tray socket and card reader for a single SIM model iPhone 11.

Replace a dirty, corroded, or bent SIM card tray socket and card reader for a dual SIM model iPhone 11.

Replace a punctured or missing mesh covering the earpiece speaker opening compatible with the iPhone 11 model #A2111, A2221, A2223. Keep dust and dirt from blocking the earpiece speaker.

Replace a damaged or corroded battery cable connector on the logic board of an iPhone 11, iPhone 11 Pro, or iPhone 11 Pro Max. This part requires microsoldering.

Replace the adhesive film that secures the rear panel to the case compatible with the A2111, A2221, A2223 model iPhone 11 smartphone.

This pair of test cables simplifies connecting and testing "Liquid Retina" LCD displays and digitizers for the iPhone 11.

Fix problems with vibration alerts and haptic feedback by replacing a malfunctioning linear oscillator motor. This part is compatible with an iPhone 11.

Replace a scratched or missing exterior case button face including the Power/Lock Button, Volume Buttons, and Vibrate/Ring Switch.

Replace the plastic camera alignment frame adhered to the inside of the front panel of your smartphone.

Replace a bent or missing dual SIM card tray for an iPhone XR. This tray holds the nano SIM cards and is inserted on the side of the phone.

Replace the internal inductive charging coil compatible with the A1984, A2105, A2106, A2108 model iPhone XR. Installing this part requires micro-soldering.

Replace a malfunctioning front-facing camera assembly and restore selfie camera functions.

Replace a dirty, corroded, or bent SIM card tray socket and card reader for a dual SIM model iPhone XR.

Replace a damaged or corroded lower end interconnect cable.

Replace the metallic shield sticker on the back side of the display cable. This part is compatible with an iPhone XR.

Fix problems with vibration alerts and haptic feedback by replacing a malfunctioning linear oscillator motor.

This pair of test cables simplifies connecting and testing LCD displays and digitizers.