iPhone Parts - Page 41

Replace a logic board (motherboard) compatible with the model A1778 iPhone 7 (AT&T). Fix processing issues like unexpected shutdowns, reboots or water damage.

Replace a logic board (motherboard) compatible with the iPhone 7 (Verizon model A1660). Fix processing issues like unexpected shutdowns, reboots or water damage.

Replace the adhesive backed foam spacer on the back of the logic board connector for the lightning port assembly compatible with the iPhone 7. Includes a set of 5 pads.

Replace any stripped or missing screws in your smartphone with this complete set of screws. This set is compatible with an iPhone 7.

Replace the screws in the bottom exterior of an iPhone 7 or 7 Plus.

Replace a home button assembly compatible with a 1st generation iPhone SE. Part #821-2092-A.

Replace the internal power/lock, volume, and the vibrate/ring switches along with the cable and the power contacts for the vibrator. Compatible with 1st generation iPhone SE models.

Replace a rear-facing 12 megapixel camera compatible with a 1st generation iPhone SE. Fix focusing or sensor issues. Part #854-00330-01.

Replace an antenna cable on the edge of your logic board compatible with a 1st generation iPhone SE model #A1662, A1723, A1724 smartphone.

This lightning connector assembly includes the lightning connector, primary microphone, and headphone jack and is compatible with 1st generation iPhone SE models.

Replace a logic board (motherboard) compatible with the iPhone 6s Plus. Fix processing issues like unexpected shutdowns, reboots or water damage.

Replace the LCD/digitizer cable FPC connector on the logic board compatible with iPhone 6s Plus model A1634, A1687, A1699.

This part is the rear panel for iPhone 6s Plus smartphone.

Replace the Wi-Fi antenna in the top left of the rear case compatible with the iPhone 6s Plus model A1634 and A1687 smartphone.

Replace a short flex cable that connects the logic board to the NFC antenna compatible with the iPhone 6s Plus. Fix impaired functions with contactless payment systems.

Use this complete set of 64 screws to replace any stripped or missing screws. This set is compatible with an iPhone 6s Plus.

Replace a bare circuit board (with no components) compatible with iPhone 6s Plus. This is only the board to which all the surface soldered components would be mounted.

Replace a LM3539 backlight driver on the logic board of an iPhone 6s, iPhone 6s Plus, or iPhone 7. This part requires micro soldering.

Replace a backlight filter on the logic board of an iPhone 6s, iPhone 6s Plus, iPhone 7, or iPhone 7 Plus. This part requires micro soldering.

Replace a LCD Digitizer cable FPC connector on the logic board compatible with the iPhone 6s model A1633 and A1688. This part requires microsoldering.

Replace the 2 screws in the bottom exterior of your phone. Compatible with an iPhone 6s, iPhone 6s Plus, iPhone 7, or iPhone 7 Plus.

Use this complete set of 62 screws to replace any stripped or missing screws. This set is compatible with an iPhone 6s.

Replace a bare circuit board (with no components) compatible with iPhone 6s. This is only the board to which all the surface soldered components would be mounted.

Replace a logic board (motherboard) compatible with iPhone 6s. Fix processing issues like unexpected shutdowns, reboots or water corrosion damage.