iPhone Parts - Page 40

Replace the adhesive backed foam spacer pad on the logic board connector bracket that presses on the connectors from the digitizer and lightning port assembly in an iPhone X. Set of 5 pads.

Replace a scratched or dented aluminum and glass rear case.

Replace a bent or missing metal bracket that secures the battery connector and two lower display cable connectors to the logic board. This part is compatible with an iPhone 8 Plus.

Replace a rear panel and camera lens cover with this new blank aftermarket rear panel assembly compatible with the iPhone 8 Plus.

Replace a stripped or missing tri-point Y000 screw securing the display shield plate to the back of the display assembly.

Replace a stripped or missing screw in your smartphone.

Replace a bare logic board (with no components) compatible with iPhone 8 Plus. This is only the board to which all the surface soldered components would be mounted.

Replace a scratched or cracked front glass panel or malfunctioning display, front-facing camera, or earpiece speaker for your iPhone.

Replace a scratched or dented aluminum and glass rear case.

Replace a rear panel and camera lens cover with this new blank aftermarket rear panel assembly compatible with the iPhone 8.

Replace a stripped or missing tri-point Y000 screw securing the display shield plate to the back of the display assembly.

Replace a stripped or missing bottom exterior screw.

Replace a stripped or missing screw. This set is compatible with an iPhone 8.

Replace the antenna cable connector on the logic board compatible with iPhone 8 or 8 Plus. This part requires micro-soldering.

Replace a front glass digitizer panel and 5.5" 1080 x 1920 LED-backlit IPS LCD display compatible with the iPhone 7 Plus model A1661, A1784, A1785, A1786. Includes the home button link cable.

Replace a logic board (motherboard) compatible with the model A1784 iPhone 7 Plus (locked to AT&T). Fix processing issues like unexpected shutdowns, reboots or water damage.

Replace a logic board (motherboard) compatible with the model A1661 iPhone 7 Plus locked to Sprint. Fix processing issues like unexpected shutdowns, reboots or water damage.

Replace a scratched or dented aluminum rear case.

Replace a stripped or missing screw. This set of screws is compatible with an iPhone 7 Plus.

Replace a bare logic board (with no components) compatible with the iPhone 7 Plus. This is only the board to which all the surface soldered components would be mounted.

Replace the metal bracket that holds the lens end of the rear-facing camera in place in the rear case compatible with the iPhone 7 Plus.

Replace a front glass digitizer panel or 4.7 inch 750 x 1334 pixel LED-backlit IPS LCD display compatible with the iPhone 7 model A1660, A1778, A1779, A1780. Includes the Front Plastic and Metal Frame, Shield Plate, Home Button Link Cable.

Replace a scratched or dented aluminum rear case.

Replace a logic board (motherboard) compatible with the model A1778 iPhone 7. Fix processing issues like unexpected shutdowns, reboots or water damage.