iPhone Parts - Page 33

Replace a malfunctioning front-facing camera assembly.

This plastic guide centers the front-facing camera lenses, the proximity sensor, and the flood illuminator over the openings in the front glass panel.

Replace the Bluetooth and Wi-Fi Antenna cable assembly in the top end of the rear case compatible with the iPhone XS model A1920, A2097, A2098, or A2100. Part #821-01860.

Replace an earpiece speaker and sensor cable compatible with the iPhone XS model #A1920, A2097, A2098, A2100. Does not include the flood illuminator or earpiece speaker. Requires microsoldering.

Replace the adhesive foam gasket that fits between the loudspeaker and the speaker opening in the rear case compatible with iPhone XS. This gasket helps seal liquid and dust out of the device.

Replace the internal audio and power switches and their brackets for an iPhone XS.

Replace a punctured or missing mesh covering the earpiece speaker opening compatible with the iPhone XS. Keep dust and dirt from blocking the speaker.

Replace scratched or missing exterior case buttons including the Power/Lock Button, Volume Buttons, and Vibrate/Ring Switch.

Replace the adhesive film secures the battery to the rear case compatible with the iPhone XS model A1920, A2097, A2098, A2100 smartphone.

Replace a malfunctioning front-facing camera assembly.

Fix problems with vibration alerts and haptic feedback by replacing a malfunctioning linear oscillator motor. This part is compatible with an iPhone XS.

Fix an unresponsive power button or malfunctioning flash with this replacement assembly.

Replace a internal inductive charging coil compatible with the iPhone XS model #A1920, A2097, A2098, A2100. Installing this part requires micro-soldering.

Replace the cellular antenna feed line flex cable that connects the logic board to parts of the rear case compatible with the iPhone XS model A1920, A2097, A2098, A2100.

Replace a bent or missing single SIM card tray for an iPhone XS. This tray holds the nano SIM card and is inserted on the side of the phone.

This plastic guide centers the front-facing camera lenses, the proximity sensor, and the flood illuminator over the openings in the front glass panel.

Replace a dual 12 MP rear-facing camera assembly compatible with the iPhone XS and iPhone XS Max smartphone. Fix focusing or sensor issues.

This pair of test cables simplifies connecting and testing OLED displays and digitizers for the iPhone X, iPhone XS, or iPhone XS Max.

Replace an earpiece speaker or sensor assembly compatible with the iPhone X model A1865, A1901, A1902. Includes the Flood Illuminator, Proximity Sensory, and Microphone.

This pair of test cables simplifies connecting and testing a dual rear-facing camera for the iPhone X. Indispensable to anyone who makes multiple iPhone X repairs.

Replace a scratched or missing exterior case button face including the Power/Lock Button, Volume Buttons, and Vibrate/Ring Switch.

Replace a broken or scratched rear case and edge bezel on an iPhone X with this new blank aftermarket rear case.

Replace a bent or missing SIM card tray for an iPhone X. This tray holds the nano SIM card and is inserted on the side of the phone.

Replace the adhesive film that secures the rear panel to the case of your A1865, A1901, A1902 model iPhone X smartphone. Complete your replacement of the rear cover with new adhesive. There is no measuring, cutting, trimming, or shaping needed with