iPhone Parts - Page 30

This test cable simplifies connecting and testing front-facing camera and sensor cable assemblies for an iPhone 7 or iPhone 7 Plus.

Replace the adhesive backed foam spacer on the back of the logic board connector for the audio control and power button cable in an iPhone 7. Set of 5 pads.

Replace the internal audio and power switches and their brackets.

Replace the mesh that covers the earpiece speaker opening compatible with the iPhone 7 model #A1660, A1778, A1779, A1780.

Replace the antenna contact assembly in the top left of the rear case compatible with the iPhone 7. Fix cellular connectivity problems.

Replace the set of three retaining clips in the edges of the rear case that help hold the front panel assembly in place.

Replace the spring contact that grounds the lightning connector assembly to the back of the home button bracket compatible with the iPhone 7 and iPhone 7 Plus.

Replace a metal bracket that secures the rear facing camera to the display assembly compatible with the iPhone 7.

This metal bracket secures the front panel assembly cables and the battery cable to the logic board.

This metal bracket secures the audio control and power button cable connector to the logic board.

Replace the metal bracket that secures the rear-facing camera connector to the logic board compatible with iPhone 7.

This metal bracket secures the camera flash to the rear case.

Replace a metal bracket that secures the earpiece speaker to the display assembly compatible with the iPhone 7 model #A1660, A1778, A1779, A1780.

Replace the metal plate between the LCD and the other internal parts compatible with the iPhone 7 model A1660, A1778, A1779, and A1780 smartphone. This plate diffuses excess heat, and protects the back of the LCD.

Replace a bare logic board (with no components) compatible with iPhone 7. This is only the board to which all the surface soldered components would be mounted.

Replace the plastic bracket that holds the earpiece speaker opening mesh in place against the inside of the front panel assembly compatible with the iPhone 7.

Replace the gasket that seals the face of the earpiece speaker to the back of the earpiece speaker dust proof mesh bracket on the inside of the front panel assembly compatible with the iPhone 7 model A1660, A1778, A1779, A1780.

Replace a scratched or missing camera flash diffuser lens.

Replace a dock port edge bezel compatible with the iPhone 7.

This set of exterior case buttons includes the Power/Lock Button, Volume Buttons, and Vibrate/Ring Switch.

Replace a cut adhesive film that secures the earpiece speaker anti-dust mesh bracket to the front panel compatible with the iPhone 7 model #A1660, A1778, A1779, A1780.

Replace the metal bracket that holds the lens end of the rear-facing camera in place in the rear case compatible with the iPhone 7.

Replace the linear oscillating vibrator in your smartphone. Compatible with an iPhone 7.

Replace an external lens cover for the rear-facing camera compatible with the iPhone 7.