Apple iPhone Adhesives - Page 4

Replace the adhesive film that secures the battery to the rear case compatible with the iPhone 6 Plus, iPhone 6s Plus, or iPhone 7 Plus smartphone model A1522, A1524, A1593, A1634, A1687, A1699, A1661, A1784, A1785, A1786.

Replace the black shield sticker covering the inside of the rear panel, compatible with iPhone 14 Plus model A2632, A2885, A2886, A2888, or A2887.

Replace the black shield sticker covering the inside of the rear panel, compatible with iPhone 14.

Replace the adhesive film that secures the battery to the case, compatible with an iPhone 14 model A2649, A2881, A2882, A2883, or A2884.

Replace the copper tape that connects the Front Facing Camera and Sensor Cable to the LCD Shield Plate.

Replace the adhesive gasket ring on the lens end of the front-facing camera of an iPhone 5, 5s, 5c, SE (1st Gen), 6, 6 Plus, 6s, or 6s Plus. Set of 5 gaskets.

Replace the adhesive film that secures the battery to the case, compatible with an iPhone 16 Pro.

This custom cut adhesive film secures the front screen display assembly to the case of an iPhone 16 Plus.

Replace the adhesive film that secures the battery to the case, compatible with an iPhone 15 Plus model A2847, A3093, A3094, or A3096.

Replace the adhesive film that secures the rear panel to the case compatible with the A2341, A2406, A2407, or A2408 model iPhone 12 Pro smartphone.

Replace the adhesive film that secures the rear panel to the case compatible with the iPhone 11 Pro Max smartphone model A2161, A2218, A2220.

Replace the adhesive film that secures the rear panel to the case compatible with the iPhone 11 Pro smartphone model A2160, A2215, A2217.

Replace the adhesive film that secures the rear panel to the case compatible with the A2111, A2221, A2223 model iPhone 11 smartphone.

This custom cut adhesive film secures the loudspeaker to the case of an iPhone XR smartphone. Models A1984, A2105, A2106, A2108.

Replace the metallic shield sticker on the back side of the display cable. This part is compatible with an iPhone XR.

Replace the adhesive foam gasket that fits between the loudspeaker and the speaker opening in the rear case compatible with iPhone XS Max. This gasket helps seal liquid and dust out of the device.

Replace the adhesive film secures the battery to the rear case compatible with the iPhone XS model A1920, A2097, A2098, A2100 smartphone.

Replace the adhesive film that secures the rear panel to the case of your A1865, A1901, A1902 model iPhone X smartphone. Complete your replacement of the rear cover with new adhesive. There is no measuring, cutting, trimming, or shaping needed with

Replace the black shield sticker covering the back side of the logic board compatible with iPhone X.

Replace the adhesive backed foam spacer adhered to the lower end EMI grounding bracket that presses on the vibration motor connector in an iPhone X. Set of five foam pads.

Replace the adhesive backed foam spacer for the front-facing cameras in an iPhone X. Set of five foam pads.

Replace the adhesive backed foam spacer on the rear-facing main camera assembly compatible with the iPhone X.

Replace the one large and three small adhesive backed foam spacer pads on the main part of the logic board connector bracket in an iPhone X. Set of 4 pads.

Replace the adhesive backed black graphite heat dissipation sticker on the back of the logic board connector bracket compatible with iPhone X.