Replace the adhesive foam gasket that fits between the loudspeaker and the speaker opening in the rear case compatible with iPhone X. This gasket helps seal liquid and dust out of the device.
Replace the adhesive backed foam spacer adhered to the lower end EMI grounding bracket that presses on the vibration motor connector in an iPhone X. Set of five foam pads.
Replace the adhesive backed foam spacer on the microphone that is part of the lightning connector assembly compatible with the iPhone X. Includes a set of 5 pads.
Replace the adhesive film that secures the rear panel to the case of your A1865, A1901, A1902 model iPhone X smartphone.
Complete your replacement of the rear cover with new adhesive. There is no measuring, cutting, trimming, or shaping needed with
Replace the one large and three small adhesive backed foam spacer pads on the main part of the logic board connector bracket in an iPhone X. Set of 4 pads.
Replace the adhesive backed foam spacer pad on the logic board connector bracket that presses on the connectors from the digitizer and lightning port assembly in an iPhone X. Set of 5 pads.