Apple iPhone Adhesives - Page 6

Replace a torn or missing black adhesive cover on the back of the metal LCD shield plate compatible with the iPhone 6 models A1549, A1586, and A1589.This adhesive holds the home button link cable on the LCD Shield Plate.

Replace the adhesive film that secures the battery to the rear case compatible with the iPhone 6, iPhone 6s, and iPhone 7 smartphone models A1549, A1586, A1589, A1633, A1688, A1700, A1660, A1778, A1779, A1780.

Replace the black shield sticker covering the inside of the rear panel, compatible with iPhone 14 Plus model A2632, A2885, A2886, A2888, or A2887.

Replace the black shield sticker covering the inside of the rear panel, compatible with iPhone 14.

Replace the copper tape that connects the Front Facing Camera and Sensor Cable to the LCD Shield Plate.

Replace the adhesive backed foam spacer on the back of the rear-facing camera cable connector compatible with the iPhone 5s or 1st generation SE. Includes a set of 5 pads.

Replace the adhesive backed foam spacer on the back of the digitizer cable connector in an iPhone 5s, 5c, or 1st generation SE. Set of 5 pads.

Replace the adhesive film that secures the battery to the rear case compatible with the iPhone 5s, iPhone 5c, and 1st generation iPhone SE model smartphone. Part #923-0575.

Replace the adhesive gasket ring on the lens end of the front-facing camera of an iPhone 5, 5s, 5c, SE (1st Gen), 6, 6 Plus, 6s, or 6s Plus. Set of 5 gaskets.

Replace the adhesive foam gasket pads surrounding the logic board connectors compatible with iPhone X. Set of three pads for one replacement.

Replace the adhesive backed foam spacer pad on the logic board connector bracket that presses on the connectors from the digitizer and lightning port assembly in an iPhone X. Set of 5 pads.

Replace the adhesive backed foam spacer on the back of the logic board connector for the lightning port assembly compatible with the iPhone 7. Includes a set of 5 pads.