Replace the adhesive foam gasket that fits between the lightning port socket and the center opening in the rear case compatible with the iPhone X.

Replace the adhesive foam gasket that fits between the loudspeaker and the speaker opening in the rear case compatible with iPhone X. This gasket helps seal liquid and dust out of the device.

Replace the adhesive backed foam spacer adhered to the lower end EMI grounding bracket that presses on the vibration motor connector in an iPhone X. Set of five foam pads.

Replace the adhesive backed foam spacer for the front-facing cameras in an iPhone X. Set of five foam pads.

Replace the adhesive backed foam spacer on the rear-facing main camera assembly compatible with the iPhone X.

Replace the one large and three small adhesive backed foam spacer pads on the main part of the logic board connector bracket in an iPhone X. Set of 4 pads.

Replace the two adhesive backed black conductive foam spacers at the top of the rear case of an iPhone X. 5 pairs of pads.

Replace the adhesive backed foam gasket spacer on the loudspeaker connector in an iPhone X. Set of 5 pads.

Replace the adhesive backed foam spacer on the microphone that is part of the lightning connector assembly compatible with the iPhone X. Includes a set of 5 pads.

Replace the adhesive backed foam spacer on the induction flex cable in an iPhone X. Set of 5 pads.

Replace the adhesive foam gasket pads surrounding the logic board connectors compatible with iPhone X. Set of three pads for one replacement.

Replace the adhesive backed foam spacer pad on the logic board connector bracket that presses on the connectors from the digitizer and lightning port assembly in an iPhone X. Set of 5 pads.