Apple iPhone Case Components - Page 5

Replace a broken or scratched rear panel with this new blank aftermarket rear panel.

Replace a broken or scratched rear panel with this new blank aftermarket rear panel compatible with iPhone 8.

Replace the metal bracket that secures and reinforces the lighting port assembly compatible with the iPhone 8.

Replace a broken or scratched rear case and edge bezel with this new blank aftermarket rear case.

Replace a bent or missing SIM card tray for an iPhone 8. This tray holds the nano SIM card and is inserted on the side of the phone.

Replace a bent or missing metal bracket securing the home button assembly to the inside of the front panel.

Replace a bent or missing metal bracket that secures the battery connector and two lower display cable connectors to the logic board.

Replace the clear plastic frame for the proximity sensor on the back of the display assembly of your smartphone.

We live to share gadget guts with the world. Now you can show off the insides of your iPhone 7 Plus with a new Insight iPhone Teardown Case.

This replacement rear case includes no internal components and has no logo or text.

Replace the mesh covers for the speaker, vent, and microphone openings. Mesh covers are part of the water and dust ingress protection for the phone.

This tray holds the nano SIM card and is inserted on the side of the phone.

Replace the gasket that seals the earpiece speaker mesh bracket assembly against the back of the earpiece speaker compatible with the iPhone 7 Plus model #A1661, A1784, A1785, A1786.

Replace the earpiece speaker plastic bracket, speaker gasket, opening mesh, and its adhesive on the inside of the front panel assembly compatible with the iPhone 7 Plus model #A1661, A1784, A1785, A1786.

This metal bracket secures the front panel assembly cables and the battery cable to the logic board.

This metal bracket secures the camera flash to the rear case.

Replace a bent or missing metal bracket that secures the earpiece speaker to the back of the display assembly compatible with the iPhone 7 Plus model #A1661, A1784, A1785, A1786.

Replace the plastic bracket that holds the earpiece speaker opening mesh in place against the inside of the front panel assembly compatible with iPhone 7 Plus model #A1661, A1784, A1785, A1786.

Replace a scratched or missing camera flash diffuser lens.

Replace the mesh that covers the earpiece speaker opening compatible with the iPhone 7 Plus model #A1661, A1784, A1785, A1786.

These plastic guides center the front-facing camera and the ambient light sensor over the openings in the front glass panel.

Replace a bent or missing metal bracket that secures the power switch to the inside of the rear case.

Replace a bent or missing metal bracket that secures the volume switches to the inside of the rear case.

This replacement rear case compatible with an iPhone 7 includes no internal components and has no logo or text.