This replacement rear case includes no internal components and has no logo or text.

Replace the mesh covers for the speaker, vent, and microphone openings. Mesh covers are part of the water and dust ingress protection for the phone.

Replace the earpiece speaker plastic bracket, speaker gasket, opening mesh, and its adhesive on the inside of the front panel assembly compatible with the iPhone 7 Plus model #A1661, A1784, A1785, A1786.

Replace an external lens cover for the rear-facing cameras compatible with iPhone 7 Plus. Includes the metal bezel ring.

We live to share gadget guts with the world. Now you can show off the insides of your iPhone 7 Plus with a new Insight iPhone Teardown Case.

This tray holds the nano SIM card and is inserted on the side of the phone.

Replace the gasket that seals the earpiece speaker mesh bracket assembly against the back of the earpiece speaker compatible with the iPhone 7 Plus model #A1661, A1784, A1785, A1786.

This metal bracket secures the front panel assembly cables and the battery cable to the logic board.

This metal bracket secures the camera flash to the rear case.

Replace a bent or missing metal bracket that secures the earpiece speaker to the back of the display assembly compatible with the iPhone 7 Plus model #A1661, A1784, A1785, A1786.

Replace the plastic bracket that holds the earpiece speaker opening mesh in place against the inside of the front panel assembly compatible with iPhone 7 Plus model #A1661, A1784, A1785, A1786.

Replace a scratched or missing camera flash diffuser lens.

Replace the mesh that covers the earpiece speaker opening compatible with the iPhone 7 Plus model #A1661, A1784, A1785, A1786.

These plastic guides center the front-facing camera and the ambient light sensor over the openings in the front glass panel.

Replace a torn or missing gasket on the SIM card tray for an iPhone 7 or iPhone 7 Plus.

Replace the internal clips that hold the external button covers in place. Set of three.

Replace the spring contact that grounds the lightning connector assembly to the back of the home button bracket compatible with the iPhone 7 and iPhone 7 Plus.

Replace a missing or bent metal bracket securing the home button assembly to the display assembly in your smartphone.

Replace a scratched or dented aluminum rear case.

Replace the metal bracket that holds the lens end of the rear-facing camera in place in the rear case compatible with the iPhone 7 Plus.