Replace a bent or missing metal bracket securing the home button assembly to the inside of the front panel.

Replace a dock port edge bezel compatible with the iPhone 7.

Replace a bent or missing SIM card tray for an iPhone 7. This tray holds the nano SIM card and is inserted on the side of the phone.

We live to share gadget guts with the world. Now you can show off the insides of your iPhone 7 with a new Insight iPhone Teardown Case.

Replace a bent or missing metal bracket that secures the power switch to the inside of the rear case.

Replace a bent or missing metal bracket that secures the volume switches to the inside of the rear case.

This replacement rear case compatible with an iPhone 7 includes no internal components and has no logo or text.

Replace a torn or missing gasket on the SIM card tray for an iPhone 7 or iPhone 7 Plus.

Replace the mesh covers for the speaker, vent, and microphone openings.

Replace the internal clips that hold the external button covers in place. Set of three.

Replace the mesh that covers the earpiece speaker opening compatible with the iPhone 7 model #A1660, A1778, A1779, A1780.

Replace the spring contact that grounds the lightning connector assembly to the back of the home button bracket compatible with the iPhone 7 and iPhone 7 Plus.

Replace a metal bracket that secures the rear facing camera to the display assembly compatible with the iPhone 7.

This metal bracket secures the front panel assembly cables and the battery cable to the logic board.

This metal bracket secures the audio control and power button cable connector to the logic board.

Replace the metal bracket that secures the rear-facing camera connector to the logic board compatible with iPhone 7.

This metal bracket secures the camera flash to the rear case.

Replace a metal bracket that secures the earpiece speaker to the display assembly compatible with the iPhone 7 model #A1660, A1778, A1779, A1780.

Replace the metal plate between the LCD and the other internal parts compatible with the iPhone 7 model A1660, A1778, A1779, and A1780 smartphone. This plate diffuses excess heat, and protects the back of the LCD.

Replace the plastic bracket that holds the earpiece speaker opening mesh in place against the inside of the front panel assembly compatible with the iPhone 7.

Replace the gasket that seals the face of the earpiece speaker to the back of the earpiece speaker dust proof mesh bracket on the inside of the front panel assembly compatible with the iPhone 7 model A1660, A1778, A1779, A1780.

Replace a scratched or missing camera flash diffuser lens.

Replace the metal bracket that holds the lens end of the rear-facing camera in place in the rear case compatible with the iPhone 7.

Replace an external lens cover for the rear-facing camera compatible with the iPhone 7.