MacBook and MacBook Pro Unibody Rubber Feet

$4.95

Product code: IF163-052-1

Click Image To Zoom

 
 
 
 

MacBook and MacBook Pro Unibody Rubber Feet

$4.95

Product code: IF163-052-1

Product Overview

Fight the insidious metric system and get your feet back!

Replace your Unibody's worn out feet with this set of four new plastic bumpers.

Nofziger would be proud!

Compatibility

Identify your Mac

  • All Mid 2009 13" Unibody MacBook Pros
  • All Mid 2010 13" Unibody MacBook Pros
  • All Early 2011 13" Unibody MacBook Pros
  • All Late 2011 13" Unibody MacBook Pros
  • All Mid 2012 13" Unibody MacBook Pros
  • All Mid 2010 15" Unibody MacBook Pros
  • All Early 2011 15" Unibody MacBook Pros
  • All Late 2011 15" Unibody MacBook Pros
  • All Mid 2012 15" Unibody MacBook Pros
  • All Mid 2009 Unibody 15" MacBook Pros
  • All Early 2009 Unibody 17" MacBook Pros
  • All Mid 2009 Unibody 17" MacBook Pros
  • 2 or 2.4 GHz Unibody (Model No. A1278) 13" MacBooks

Product Details

  $4.95

 

Condition:

New

Available: 43

Add to Cart
 

Compatibility

MacBook Pro 13" Unibody Early 2011
2.3 GHz (Early 2011)
2.7 GHz (Early 2011)
MacBook Pro 13" Unibody Late 2011
2.4 GHz (Late 2011)
2.8 GHz (Late 2011)
MacBook Pro 13" Unibody Mid 2009
2.26 GHz (Mid 2009)
2.53 GHz (Mid 2009)
MacBook Pro 13" Unibody Mid 2010
2.4 GHz (Mid 2010)
2.66 GHz (Mid 2010)
MacBook Pro 13" Unibody Mid 2012
2.5 GHz (Mid 2012)
2.9 GHz (Mid 2012)
MacBook Pro 15" Unibody Early 2011
2 GHz (Early 2011)
2.2 GHz (Early 2011)
2.3 GHz (Early 2011)
MacBook Pro 15" Unibody Late 2011
2.2 GHz (Late 2011)
2.4 GHz (Late 2011)
2.5 GHz (Late 2011)
MacBook Pro 15" Unibody Mid 2010
2.4 GHz (Mid 2010)
2.53 GHz (Mid 2010)
2.66 GHz (Mid 2010)
2.8 GHz (Mid 2010)
MacBook Pro 15" Unibody Mid 2012
2.3 GHz (Mid 2012)
2.6 GHz (Mid 2012)
2.7 GHz (Mid 2012)
MacBook Pro 17" Unibody
2.66 GHz (Early 2009)
2.8 GHz (Mid 2009)
2.93 GHz (Early 2009)
3.06 GHz (Mid 2009)
MacBook Unibody Model A1278
2 GHz (A1278)
2.4 GHz (A1278)
 

Stories

dezineworks's Story Photo #714075

My Problem

starting to fix some old favorite MacBooks around the house

My Fix

first iFixit project: replaced a fan in a 2006 MacBook 1,1 and a dead battery in the same 2006 MacBook. now i feel like i'm ready to learn how to replace the display. and upgrade the 350GB HD to 5400rpm or 7200rpm or 10000rpm 2TB HD or SSHD or SSD. still not electronically sure about what an 85W power cord charger will do that a 60W power cord charger will not do to a 2006 MacBook 1,1

My Advice

https://www.facebook.com/photo.php?fbid=...

My Problem

Had to change the battery in my 5 year old MacBook Pro 15"

My Fix

The service and delivery speed was top notch!

Installed the new battery I got from Ifixit.

What bothers me is that the new battery is not as good as I expected.

It drains fairly quickly, almost the same speed as the old one.

The situation is somewhat getting better.

My Advice

Is this normal? Did I do something wrong when charging for the first time, etc. etc... Or are those batteries just some second grade product?

My Problem

Had to change my old battery since its capacity was down to 2868 mAh.

My Fix

Didn't have a Tri-wing screwdriver, so had to get that first. The repair was simple, easy and over in 2 minutes.

My Advice

Haven't got any particular advice, just follow the guide.

My Problem

The battery was old and giving replacement messages. the trackpad would only click if you hit it in the middle bottom part. Clicking on the left bottom part was hit and miss.

My Fix

The repair went OK. I had some trouble getting some of the case screws out. especially one of the long ones in the upper corer of the bottom case. I had to press very hard while turning. Even so, I think I mushed the philips head a little. I agree with others that the screws for the track pad may be 000, not 00 philips. they were difficult to remove with the 00, seemed easier with the 000. I still have to go back in and adjust the alignment of the track pad. i did not see it was misaligned until I put it all back together.

My Advice

I think that it would be good for someone with experience to check and see which type of philips head goes to the trackpad and specify that in the instructions. I am grateful though for the instructions. i would not have had a chance without them.

My Problem

Increased RAM from 6MB to 8MB / Replaced rubber footings / Upgraded HD to 1TB SSD

My Fix

Awesome repair job at an awesome price! Thanks Fixit.com. Just ordered another 1TB SSD for another MacBook Pro in the house.

My Advice

When ghosting/cloning your harddrive, be sure to pick a cloning software that is easy to use.

My Problem

Initially my MacBook Pro Late 2011 failed to boot, it shows a folder with question mark on it. In internet recovery, the hard drive is not even showing up in Disk Utility.

So I thought the hard drive failed. Bought a SSD to replace the hard drive. Then I tried to install El Capitan on the empty SSD using internet recovery, target disk mode, usb installer. Non of them could finish installation. So I went to Apple Genius Bar, the guy said hardware test passed, but he still could not install the system on the SSD, it might be the SSD compatibility issue.

Upon further googling, I found out it might be the hard drive cable. So I bought an external SATA hard drive adapter to verify it. The system booted without any problem with the hard drive attached externally.

My Fix

It was actually not that hard, just follow the guidance and be careful with the fragile yellow sensor bracket cable. Use tweezers as people mentioned in the comment.

My Advice

Whenever you MacBook Pro cannot boot, consider potential problem with your hard drive cable. It obviously happens to a lot of people with a MacBook Pro mid-2012 to 2009.

My Problem

Needed to replace the feet

My Fix

Easy just used rubber cement to stick them on there

My Advice

Line up the holes and it'll be well!

My Problem

The feet on my early 2011 MacBook Pro fell off. Over the years of pulling out of bags and normal wear and tear the feet on the mac fell off. I tried my best to keep and reuse but after changing cities I had lost the rubber bottoms.

My Fix

The repair went smooth, as I just stuck the new feet in place of the old.

My Advice

My advice is to clean the surface prior to applying the new feet. Also I advise to line the nub on the feet to the corresponding hole on the bottom of the MacBook.

My Problem

Hard drive cable was damaged

My Fix

Super easy, especially with the step by step guide that was provided on your site!

My Advice

Make sure you don't skip a step, and you'll be golden

My Problem

The rubber feet on the bottom of my MacBook Pro had all come off.

My Fix

Everything went great! No problems, and the feet were put on with little effort.

My Advice

Don't wait until all your rubber feet fall off, and then replace. I say go ahead and just replace all of them after one falls off.