Skip to main content

Introduction

Replace the aluminum bottom case in a MacBook Pro 13" Unibody.

  1. MacBook Pro 13" Unibody Mid 2009 Lower Case Replacement, Remove the lower case screws: step 1, image 1 of 1
    • Remove the following 10 screws securing the lower case to the MacBook Pro 13" Unibody:

    • Seven 3 mm Phillips screws.

    • Three 13.5 mm Phillips screws.

  2. MacBook Pro 13" Unibody Mid 2009 Lower Case Replacement, Lift the lower case away: step 2, image 1 of 1
    • Slightly lift the lower case and push it toward the rear of the computer to free the mounting tabs.

Conclusion

To reassemble your device, follow these instructions in reverse order.

52 other people completed this guide.

One Comment

2 tornillos se da&aron, los q estan al lado de las lenguetas de montaje -lado de la bateria- pues la bateria se inflo y presiona la carcasa

q haces p resolver ??

enrique lopez vega - Reply

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 5

Past 30 Days: 38

All Time: 43,776