iPhone 7 Plus Parts - Page 3

Replace a torn or missing gasket on the hold button assembly for an iPhone 7 or iPhone 7 Plus.

Replace a torn or missing gasket on the SIM card tray for an iPhone 7 or iPhone 7 Plus.

This test cable simplifies connecting multiple home button assemblies for the iPhone 7 or 7 Plus.

Replace a damaged SIM card tray holder socket on the logic board of an iPhone 7 or 7 Plus. This part requires micro soldering.

Replace the internal clips that hold the external button covers in place. Set of three.

This test cable simplifies connecting multiple audio control and power button cable assemblies for the iPhone 7 or iPhone 7 Plus.

This test cable simplifies connecting multiple lightning connector assemblies compatible with the iPhone 7 and iPhone 7 Plus.

This test cable simplifies connecting and testing rear-facing cameras for the iPhone 7 and iPhone 7 Plus. Indispensable to anyone who makes multiple iPhone 7 or iPhone 7 Plus repairs.

This test cable simplifies connecting and testing front-facing camera and sensor cable assemblies for an iPhone 7 or iPhone 7 Plus.

Replace the spring contact that grounds the lightning connector assembly to the back of the home button bracket compatible with the iPhone 7 and iPhone 7 Plus.

Charge or sync lightning port equipped portable Apple devices

Replace a dual 12 MP rear-facing camera compatible with the iPhone 7 Plus. Fix focusing or sensor issues.

Replace a front glass digitizer panel and 5.5" 1080 x 1920 LED-backlit IPS LCD display compatible with the iPhone 7 Plus model A1661, A1784, A1785, A1786. Includes the home button link cable.

Replace a logic board (motherboard) compatible with the model A1784 iPhone 7 Plus (locked to AT&T). Fix processing issues like unexpected shutdowns, reboots or water damage.

Replace a logic board (motherboard) compatible with the model A1661 iPhone 7 Plus locked to Sprint. Fix processing issues like unexpected shutdowns, reboots or water damage.

Replace a scratched or dented aluminum rear case.

Replace a stripped or missing screw. This set of screws is compatible with an iPhone 7 Plus.

Replace a bare logic board (with no components) compatible with the iPhone 7 Plus. This is only the board to which all the surface soldered components would be mounted.

Replace the metal bracket that holds the lens end of the rear-facing camera in place in the rear case compatible with the iPhone 7 Plus.

Replace a front camera and sensor cable compatible with the iPhone 7 Plus. Includes the front-facing camera, one microphone, and the proximity sensor. Part #821-00519-03.

Replace the screws in the bottom exterior of an iPhone 7 or 7 Plus.

Replace a backlight filter on the logic board of an iPhone 6s, iPhone 6s Plus, iPhone 7, or iPhone 7 Plus. This part requires micro soldering.

Replace the 2 screws in the bottom exterior of your phone. Compatible with an iPhone 6s, iPhone 6s Plus, iPhone 7, or iPhone 7 Plus.

Replace an SN2400B0 charging IC on the logic board of an iPhone 6, iPhone 6 Plus, iPhone 6s, iPhone 6s Plus, iPhone 7, or iPhone 7 Plus. This part requires micro soldering.