iPhone 7 Plus Parts - Page 2

Replace the backlight film on the display assembly of your smartphone. This part requires micro soldering.

This tray holds the nano SIM card and is inserted on the side of the phone.

Replace the black adhesive that secures the LCD IC and cable to the LCD shield plate compatible with the iPhone 7 Plus model A1661, A1784, A1785, A1786 smartphone. Includes a set of 5 stickers.

Replace the adhesive backed foam spacer on the back of the battery cable connector in an iPhone 7 Plus. Set of 5 pads.

Replace the adhesive backed foam spacer on the back of the logic board connector for the lightning port assembly compatible with the iPhone 7 Plus. Includes a set of 5 pads.

Replace a damaged or malfunctioning internal audio or power switch and brackets.

Replace the gasket that seals the earpiece speaker mesh bracket assembly against the back of the earpiece speaker compatible with the iPhone 7 Plus model #A1661, A1784, A1785, A1786.

Replace the earpiece speaker plastic bracket, speaker gasket, opening mesh, and its adhesive on the inside of the front panel assembly compatible with the iPhone 7 Plus model #A1661, A1784, A1785, A1786.

Replace the antenna in the top left of the rear case compatible with the iPhone 7 Plus smartphone model #A1661, A1784, A1785, A1786.

Replace the set of six retaining clips in the edges of the rear case that help hold the front panel assembly in place.

This metal bracket secures the front panel assembly cables and the battery cable to the logic board.

This metal bracket secures the camera flash to the rear case.

Replace a bent or missing metal bracket that secures the earpiece speaker to the back of the display assembly compatible with the iPhone 7 Plus model #A1661, A1784, A1785, A1786.

Replace the custom cut adhesive film that secures the earpiece speaker anti-dust mesh bracket to the front panel compatible with the iPhone 7 Plus model #A1661, A1784, A1785, A1786.

Replace the plastic bracket that holds the earpiece speaker opening mesh in place against the inside of the front panel assembly compatible with iPhone 7 Plus model #A1661, A1784, A1785, A1786.

This set of exterior case buttons includes the Power/Lock Button, Volume Buttons, and Vibrate/Ring Switch.

Replace a scratched or missing camera flash diffuser lens.

Replace the mesh that covers the earpiece speaker opening compatible with the iPhone 7 Plus model #A1661, A1784, A1785, A1786.

These plastic guides center the front-facing camera and the ambient light sensor over the openings in the front glass panel.

Replace a front camera and sensor cable compatible with the iPhone 7 Plus. Includes the front-facing camera, one microphone, and the proximity sensor. Part #821-00519-03.

This test cable simplifies connecting and testing LCDs and digitizers for the iPhone 7 Plus.

Replace a torn or missing gasket on the hold button assembly for an iPhone 7 or iPhone 7 Plus.

Replace a torn or missing gasket on the SIM card tray for an iPhone 7 or iPhone 7 Plus.

This test cable simplifies connecting multiple home button assemblies for the iPhone 7 or 7 Plus.