PC3-10600 2 GB RAM Chip

$24.95

Product code: IF111-039-1

Click Image To Zoom

 
 

PC3-10600 2 GB RAM Chip

$24.95

Product code: IF111-039-1

Product Overview

Adding RAM to your computer can provide a significant performance boost.

Compatibility

  • iMac 21.5" (Mid 2011)
  • iMac 27" (Mid 2011)
  • Mac mini (Mid 2011)
  • MacBook Pro 13" Unibody (Early 2011/Late 2011)
  • MacBook Pro 15" Unibody (Early 2011/Late 2011)
  • MacBook Pro 17" Unibody (Early 2011/Late 2011)

Product Details

  • Height: 1" (Low Profile)
  • Type: 204 pin, DDR-3, 1333 MHz

  $24.95 New

 
 

Condition:

New

Warranty:

One year warranty

18 Available

Add to Cart
 

Replacement Guides

iMac Intel 21.5" EMC 2389

Difficulty: Easy

iMac Intel 21.5" EMC 2428

Difficulty: Easy

Mac Mini Mid 2011

Difficulty: Very easy

MacBook Pro 15" Unibody Late 2011

Difficulty: Moderate

 

Compatibility

iMac Intel 21.5" EMC 2428
2.5 GHz (Core i5)
2.7 GHz (Core i5)
2.8 GHz (Core i7)
iMac Intel 27"
2.7 GHz (Core i5)
3.1 GHz (Core i5)
3.4 GHz (Core i7)
Mac Mini Mid 2011
2 GHz (Quad i7, Mid 2011)
2.3 GHz (Dual i5, Mid 2011)
2.5 GHz (Dual i5, Mid 2011)
2.7 GHz (Dual i7, Mid 2011)
MacBook Pro 13" Unibody Early 2011
2.3 GHz (Early 2011)
2.7 GHz (Early 2011)
MacBook Pro 13" Unibody Late 2011
2.4 GHz (Late 2011)
2.8 GHz (Late 2011)
MacBook Pro 15" Unibody Early 2011
2 GHz (Early 2011)
2.2 GHz (Early 2011)
2.3 GHz (Early 2011)
MacBook Pro 15" Unibody Late 2011
2.2 GHz (Late 2011)
2.4 GHz (Late 2011)
2.5 GHz (Late 2011)
MacBook Pro 17" Unibody Early 2011
2.2 GHz (Early 2011)
2.3 GHz (Early 2011)
MacBook Pro 17" Unibody Late 2011
2.4 GHz (Late 2011)
2.5 GHz (Late 2011)
 

Stories

My Problem

My MacBook 13", end 2009, 250 Gb, 2 1Mb RAM, worked enormous slow after loading Yosemite. The imac 21.5" mid 2010, 500 Gb, 2 2Mb RAM, was a little bit slower after Yosemite but had open space for 2 more RAM chips.

My Fix

Inside the MacBook 13", end 2009 I changed the Hitachi HD 250 Gb. I put in a 1 TB Seagate SSD Hybrid HD and 2 new 4 Mb RAM chips. To do all this was really not complicated. ifixit delivered a super repair kit! First of all I studied very good the Youtube movies about the repair procedure.

To introduce the RAM chips in the imac was an easy thing. First I was a little bit worried about how strong you have to pull at the plastic bands to take out the chips. But for my case it was not really necessary to pull those out because there was open space which I filled with 2 2Mb RAM chips. Totally I have now 8 Mb RAM. The imac works now again the best.

Both make-ups were done in a short time.

Loading the datas from the old HD to the new SSD in the MacBook:

First of all I secured the datas on a LaCie back-up HD. After the make-up I tried first to reload from the old HD by using the delivered Drive Enclosure. This didn't work correctly. It showed the "mistake 254" again and again and I was not successful. So I tried with the Lacie HD. This worked the best.

My Advice

The most time I lost was to find the right RAM chip product for the imac 21.5" mid 2010.

I am very lucky to have found IFIXIT in the internet. It's really great how perfect all went on with the make-up of my old Computers: especially too the email contact, the order and payment administration and delivery. I ordered at 12-30-2014 in the morning and got the devices 01-05-2015 at 10.00 am at the door in Cham Switzerland (delivery over New Year's Day and Weekend!). Thank you very much! Great!

I have now the feeling and result of a brand new MacBook. That's amazing.

Peter Meier

My Problem

Machine at a university with the hard drive failing (would not install OSX 10.9). Do a memory upgrade at the same time.

My Fix

No problems - the glass is awfully thin though and it would be nice to know it was held by magnets.... Took less than an hour.

My Advice

Maybe swap around steps 6 and 7 as the display data cable is shorter than the LED backlight cable. Use a magnetic tipped screwdriver as the screws holding down the display can quite easily fall into the unit. I magnetised mine using the magnets holding the glass.

My Problem

My iMac was underpowered for the new OSX Mavericks and other software upgrades. This was slowing it down since it began using virtual memory as a substitute for RAM.

My Fix

Piece of cake! It took only a few minutes. Fortunately the iFixit Guide clearly stated to make sure I heard and felt a click on proper insertion of the chips. Otherwise, I might have been disappointed.

My Advice

Get some good advice from Apple and iFixit and whenever possible, fix it yourself. ALSO...this was the first time I flipped my iMac over this way and I found the vent holes were becoming clogged, so I vacuumed them for better ventilation.