iPhone 7 Parts - Page 4

Replace the adhesive backed foam spacer on the back of the logic board connector for the lightning port assembly compatible with the iPhone 7. Includes a set of 5 pads.

Replace any stripped or missing screws in your smartphone with this complete set of screws. This set is compatible with an iPhone 7.

Replace the screws in the bottom exterior of an iPhone 7 or 7 Plus.

Replace a front camera and sensor cable compatible with the iPhone 7. Includes the front-facing camera and the proximity sensor. Part #821-00504-A.

Replace a LM3539 backlight driver on the logic board of an iPhone 6s, iPhone 6s Plus, or iPhone 7. This part requires micro soldering.

Replace a backlight filter on the logic board of an iPhone 6s, iPhone 6s Plus, iPhone 7, or iPhone 7 Plus. This part requires micro soldering.

Replace the 2 screws in the bottom exterior of your phone. Compatible with an iPhone 6s, iPhone 6s Plus, iPhone 7, or iPhone 7 Plus.

Replace the backlight diode on the logic board of an iPhone 6, iPhone 6s, iPhone 6s, or iPhone 7. This part requires micro soldering.

Replace an SN2400B0 charging IC on the logic board of an iPhone 6, iPhone 6 Plus, iPhone 6s, iPhone 6s Plus, iPhone 7, or iPhone 7 Plus. This part requires micro soldering.

5W adapter used for iPhones and iPods.

Replace a 65730A0P display PMU on the logic board of an iPhone 5c, iPhone 5s, iPhone 6, iPhone 6 Plus, iPhone 6s, iPhone 6s Plus, iPhone 7, or iPhone 7 Plus. This part requires micro soldering.

Replace a LCD data choke on the logic board of an iPhone or iPad. This part requires micro soldering.

Replace the screws in the bottom exterior of an iPhone 7 or 7 Plus.