iPhone 7 Parts - Page 3

Replace the metal bracket that secures the rear-facing camera connector to the logic board compatible with iPhone 7.

This metal bracket secures the camera flash to the rear case.

Replace a metal bracket that secures the earpiece speaker to the display assembly compatible with the iPhone 7 model #A1660, A1778, A1779, A1780.

Replace the metal plate between the LCD and the other internal parts compatible with the iPhone 7 model A1660, A1778, A1779, and A1780 smartphone. This plate diffuses excess heat, and protects the back of the LCD.

Replace a bare logic board (with no components) compatible with iPhone 7. This is only the board to which all the surface soldered components would be mounted.

Replace the plastic bracket that holds the earpiece speaker opening mesh in place against the inside of the front panel assembly compatible with the iPhone 7.

Replace the gasket that seals the face of the earpiece speaker to the back of the earpiece speaker dust proof mesh bracket on the inside of the front panel assembly compatible with the iPhone 7 model A1660, A1778, A1779, A1780.

Replace a scratched or missing camera flash diffuser lens.

This set of exterior case buttons includes the Power/Lock Button, Volume Buttons, and Vibrate/Ring Switch.

Replace a cut adhesive film that secures the earpiece speaker anti-dust mesh bracket to the front panel compatible with the iPhone 7 model #A1660, A1778, A1779, A1780.

Replace the metal bracket that holds the lens end of the rear-facing camera in place in the rear case compatible with the iPhone 7.

These plastic guides center the front-facing camera and the ambient light sensor over the openings in the front glass panel.

Replace a front camera and sensor cable compatible with the iPhone 7. Includes the front-facing camera and the proximity sensor. Part #821-00504-A.

This test cable simplifies connecting and testing LCDs and digitizers for the iPhone 7.

Replace a bent or missing SIM card tray for an iPhone 7. This tray holds the nano SIM card and is inserted on the side of the phone.

Replace a 12 megapixel main camera compatible with the iPhone 7. Fix focusing or sensor issues.

Replace a 12 megapixel main camera compatible with the iPhone 7. Fix focusing or sensor issues.

Replace the lightning connector, two microphones, and flex cable compatible with the iPhone 7. Fix problems with charging, connectivity to USB devices, and audio recording. Part #821-00270-08.

Charge or sync lightning port equipped portable Apple devices

Replace a front glass digitizer panel or 4.7 inch 750 x 1334 pixel LED-backlit IPS LCD display compatible with the iPhone 7 model A1660, A1778, A1779, A1780. Includes the Front Plastic and Metal Frame, Shield Plate, Home Button Link Cable.

Replace a scratched or dented aluminum rear case.

Replace a logic board (motherboard) compatible with the model A1778 iPhone 7. Fix processing issues like unexpected shutdowns, reboots or water damage.

Replace a logic board (motherboard) compatible with the model A1778 iPhone 7 (AT&T). Fix processing issues like unexpected shutdowns, reboots or water damage.

Replace a logic board (motherboard) compatible with the iPhone 7 (Verizon model A1660). Fix processing issues like unexpected shutdowns, reboots or water damage.