iPhone 7 Parts - Page 2

Replace the two gold-colored conductive adhesive areas on the flex cable of the lightning connector assembly compatible with the iPhone 7.

This test cable simplifies connecting multiple home button assemblies for the iPhone 7 or 7 Plus.

Replace the mesh covers for the speaker, vent, and microphone openings.

Replace the backlight film on the display assembly. Compatible with an iPhone 7. This part requires micro soldering.

Replace a damaged SIM card tray holder socket on the logic board of an iPhone 7 or 7 Plus. This part requires micro soldering.

Replace the Wi-Fi Diversity Antenna and cable that is stuck to the loudspeaker in the lower right corner compatible with iPhone 7 model #A1660, A1778, A1779, A1780. Part #821-00513.

This test cable simplifies connecting multiple audio control and power button cable assemblies for the iPhone 7 or iPhone 7 Plus.

This test cable simplifies connecting multiple lightning connector assemblies compatible with the iPhone 7 and iPhone 7 Plus.

This test cable simplifies connecting and testing rear-facing cameras for the iPhone 7 and iPhone 7 Plus. Indispensable to anyone who makes multiple iPhone 7 or iPhone 7 Plus repairs.

This test cable simplifies connecting and testing front-facing camera and sensor cable assemblies for an iPhone 7 or iPhone 7 Plus.

Replace the adhesive backed foam spacer on the back of the logic board connector for the audio control and power button cable in an iPhone 7. Set of 5 pads.

Replace the internal audio and power switches and their brackets.

Replace the mesh that covers the earpiece speaker opening compatible with the iPhone 7 model #A1660, A1778, A1779, A1780.

Replace the antenna contact assembly in the top left of the rear case compatible with the iPhone 7. Fix cellular connectivity problems.

Replace the set of three retaining clips in the edges of the rear case that help hold the front panel assembly in place.

Replace the spring contact that grounds the lightning connector assembly to the back of the home button bracket compatible with the iPhone 7 and iPhone 7 Plus.

Replace a metal bracket that secures the rear facing camera to the display assembly compatible with the iPhone 7.

This metal bracket secures the front panel assembly cables and the battery cable to the logic board.

This metal bracket secures the audio control and power button cable connector to the logic board.

Replace the metal bracket that secures the rear-facing camera connector to the logic board compatible with iPhone 7.

This metal bracket secures the camera flash to the rear case.

Replace a metal bracket that secures the earpiece speaker to the display assembly compatible with the iPhone 7 model #A1660, A1778, A1779, A1780.

Replace the metal plate between the LCD and the other internal parts compatible with the iPhone 7 model A1660, A1778, A1779, and A1780 smartphone. This plate diffuses excess heat, and protects the back of the LCD.

Replace a bare logic board (with no components) compatible with iPhone 7. This is only the board to which all the surface soldered components would be mounted.