Fix Your Stuff Community Store

The March 2015 update of Apple's 13" MacBook Air features fifth generation Intel Core i5 and i7 processors, resulting in slightly increased performance and battery life.

623 Questions View all

Options

No picture after top assembly replacement

Macbook air 13" A1502 emc 2835

I had a broken screen. Could still see picture a bit not really applicable to do work so I had to fix it, keyboard lit....etc. After top assembly replacement no picture, no keyboard light. I made sure before I unplugged any connections I powered down machine, unplugged device, and disconnected battery.

I even tried connecting old assembly back to see if it was a malfunction with new part but still no picture or keyboard light.

This repair is pretty straightforward.

Is there anything I can try?

Answered! View the answer I have this problem too

Is this a good question?

Yes No
Score 0
1 Comment

Thanks for the reply, I will try that tomorrow.

Just another quick question, if it does not generate a signal on an external monitor what are my options after that?

by

Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest
Chosen Solution

Options

Hook it up to an external monitor to see if the GPU is generating a signal first. Then go through the installation again making sure of the LDVS cable connection to the logic board. Then reset the PRAM:

P,R, Command & Option keys on restart. Let it tone three times.

MacBook Air 13" Early 2015 Display Assembly Replacement

Was this answer helpful?

Yes No
Score 2

1 Comment:

It's putting out a signal to an external monitor I did reset the P Ram but still nothing. The keyboard is not lighting up either

by

Add a comment

Add your answer

CluelessInSeattle will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 71