Smartwatch Parts - Page 3

Replace a damaged or malfunctioning force touch sensor that fits between the display and rear case of a 44 mm Series 4 Apple Watch.

Replace an OLED screen compatible with Apple Watch (38 mm Series 3 Cellular) Models A1890, A1860, and A1889 smartwatches. Includes all of the small parts preinstalled in the assembly. Ion-X. Sapphire Crystal.

Replace three heat dissipation stickers inside a 44mm Series 6 Apple Watch.

Replace a cracked, scratched, or malfunctioning front glass digitizer and OLED display assembly compatible with a 41 mm Series 7 Apple Watch.

Replace a 279 mAh battery compatible with Apple Watch 38 mm Series 3 Cellular Models A1890, A1860, and A1889. 1.07 Watt Hours (Wh). 3.82 Volts (V). Battery model A1848. Installation adhesive included.

Replace a model #LSSP281324AB battery compatible with the Fitbit One smartwatch fitness wristband. 3.7 Volts (V). 60 mAh.

Replace a 542 mAh battery compatible with Apple Watch Ultra Models A2859, A2684, and A2622. 2.094 Watt Hours (Wh). 3.86 Volts (V). Battery model A2749.

This custom cut adhesive tape bridges between the screen cable bracket and the back of the screen cable connector.

Replace a missing or damaged back sensor glass screw o-ring in a 41mm or 45mm Pixel Watch 4. Contains two o-rings.

Replace a damaged display o-ring for a 41mm Pixel Watch 4.

Replace an adhesive strip compatible with 41 mm Series 8 Apple Watch models A2857, A2773, A2772, A2770. Ensure a tight seal between the case and the display.

Replace a 160 mAh battery compatible with the Pebble 2 SE smartwatch. Model #LSSP441522AE. 3.7 Volts (V).

Replace a cracked, scratched, or malfunctioning front glass digitizer and LTPO display assembly of a 44 mm Series 5 Apple Watch.

Replace an OLED screen compatible with 44 mm SE Apple Watch smartwatches model A2352, A2354, A2356. Fix issues like a broken or scratched screen or touch issues.

Replace the adhesive film that secures the rear panel to the case compatible with Apple Watch (44 mm Series 6) model smartwatches. Complete your replacement of the rear cover with new adhesive. There is no measuring, cutting, trimming, or shaping

Replace a damaged or torn flex cable that connects the display to the logic board. This cable is compatible with a Cellular model 44 mm Series 4 Apple Watch and requires microsoldering to install.

Replace a damaged or malfunctioning force touch sensor that fits between the display and rear case of a 40 mm Series 4 Apple Watch.

Replace a cracked, scratched, or malfunctioning front glass digitizer and OLED display assembly of a 44 mm Series 4 Apple Watch.

Replace a dead or malfunctioning battery in a Fitbit Versa 2 smartwatch.

Replace a touch screen display compatible with the Fitbit Charge 2 smartwatch. Includes all of the small parts preinstalled in the assembly.

Replace a 45 mAh battery compatible with the Fitbit Alta HR fitness wristband. 3.7 Volts (V). Model #WL-FBT07.

Replace the force touch sensor and adhesive that fits between the display and rear case compatible with the 38 mm Series 3 GPS Only model Apple Watch model A1858.

Replace a torn or missing black sticker on the back of the display of a Series 2 or Series 3 42mm model Apple Watch with this set of two stickers. One sticker bridges the three EMI shields. The other sticker bridges the three cables from the logic

Replace the force touch sensor and adhesive that fits between the display and rear case of specific models of the Apple Watch. Fits 38mm Series 2 and Series 3 Cellular models. Model numbers A1757, A1816, A1860, A1889, and A1890.