Smartwatch Adhesives

Replace an adhesive strip compatible with 44 mm Series 6 Apple Watch models A2292, A2294, A2376. Ensure a tight seal between the case and the display.

Replace an adhesive strip compatible with 45 mm Series 7 Apple Watch models A2474, A2477, A2478. Ensure a tight seal between the case and the display.

Replace the adhesive strip compatible with the 40 mm case Series 4 or Series 5 Apple Watch model #A1975, A1977, A2007, A2092, A2094, and A2156.

Use this custom adhesive patch to secure the battery compatible with an Original or Series 1-6 Apple Watch model A1553, A1554, A1802, A1803, A1816, A1817, A1858, A1859, A1860, A1860, A1861, A1861, A1889, A1889, A1890, A1890, A1891, A1891, A1892

Replace an adhesive strip compatible with the 38 mm case Apple Watch Original model and Series 1 and 2 models.

Replace the adhesive film that secures the rear panel to the case compatible with Apple Watch (45 mm Series 7) model smartwatches. Complete your replacement of the rear cover with new adhesive. There is no measuring, cutting, trimming, or shaping

This custom cut adhesive tape bridges between the screen cable bracket and the back of the screen cable connector.

Replace the adhesive strip compatible with the 42 mm case Series 3 Apple Watch model A1859, A1861, A1891, and A1892.

Replace the adhesive strip compatible with 40 mm Series 6 Apple Watch models A2291, A2293, A2375.

Replace an adhesive strip compatible with 45 mm Series 8 Apple Watch models A2858, A2775, A2774, A2771. Ensure a tight seal between the case and the display.

Replace the force touch sensor and adhesive gasket that secures the display to the rear case compatible with the 38 mm Apple Watch Original model and Series 1 model A1553 and A1802.

Replace the adhesive film that secures the rear panel to the case compatible with Apple Watch (40 mm Series 6) model smartwatches. Complete your replacement of the rear cover with new adhesive. There is no measuring, cutting, trimming, or shaping

Replace the force touch sensor and adhesive that fits between the display and rear case of specific models of the Apple Watch. Fits 42mm Series 2 and Series 3 Cellular models. Model numbers A1758, A1817, A1861, A1891, and A1892.

Replace an adhesive strip compatible with 41 mm Series 7 Apple Watch models A2473, A2475, A2476. Ensure a tight seal between the case and the display.

Replace the force touch sensor and adhesive gasket that secures the display to the rear case compatible with the 42 mm Apple Watch Original model and Series 1 model A1554 and A1803.

Replace the adhesive strip compatible with the 42 mm case Apple Watch Original, Series 1, and 2 models #A1554, A1758, A1803, and A1817.

Replace an adhesive strip compatible with 41 mm Series 8 Apple Watch models A2857, A2773, A2772, A2770. Ensure a tight seal between the case and the display.

Replace an adhesive strip compatible with the 44 mm case Series 4 or Series 5 Apple Watch model A1976, A1978, A2008, A2093, A2095, and A2157.

Replace three heat dissipation stickers inside a 44mm Series 6 Apple Watch.

Replace the adhesive film that secures the rear panel to the case compatible with Apple Watch (44 mm Series 6) model smartwatches. Complete your replacement of the rear cover with new adhesive. There is no measuring, cutting, trimming, or shaping

Replace the force touch sensor and adhesive that fits between the display and rear case compatible with the 38 mm Series 3 GPS Only model Apple Watch model A1858.

Replace the force touch sensor and adhesive gasket that secures the display to the rear case compatible with the 42 mm Series 3 GPS Only model Apple Watch model A1859.

Replace the force touch sensor and adhesive that fits between the display and rear case of specific models of the Apple Watch. Fits 38mm Series 2 and Series 3 Cellular models. Model numbers A1757, A1816, A1860, A1889, and A1890.

Replace three heat dissipation stickers inside a 40mm Series 6 Apple Watch.