iPhone SE A1723 Parts
Grab a toolkit for your iPhone SE A1723 model and fix your broken phone!
iFixit has you covered with parts, tools, and free repair guides. Repair with confidence! All of our replacement parts are tested to rigorous standards and backed by our industry-leading warranty.
Choose Category
- All
- Accessories
- Adapters
- Adhesive Pads
- Adhesive Strips
- Antennas
- Batteries
- Buttons
- Cables
- Cameras
- Case Components
- Clips
- Dock Connectors
- Earbuds
- Gripping
- Headphone Jacks
- iFixit Exclusives
- Lenses
- Lightning Connector
- Microphones
- Microsoldering
- Prying and Opening
- Screens
- Screws
- Sensors
- SIM
- Speakers
- Test Cables
- Vibrators
Parts that work with iPhone SE A1723:
iPhone SE (1st Gen) Battery
Replace a 1624 mAh battery compatible with a 1st generation iPhone SE. 3.82 Volts (V), 6.21 Watt Hours (Wh). This replacement does not require soldering.
iPhone SE (1st Gen) Screen
Replace a screen compatible with a 1st generation iPhone SE. Includes all of the small parts pre-installed in the assembly, saving time and increasing the quality of your...
iHold EVO
Flexible LCD holder
Lightning to USB Charging Cable
Charge or sync lightning port equipped portable Apple devices
iPhone 5s/5c/SE (1st Gen) Battery Adhesive Strips
Replace the adhesive film that secures the battery to the rear case compatible with the iPhone 5s, iPhone 5c, and 1st generation iPhone SE model smartphone. Part #923-057...
NuGlas Tempered Glass Screen Protector for iPhone 5/5s/5c/SE (1st Gen)
Protect the display on your iPhone 5, 5s, 5c, or 1st generation SE from impacts and scratches with this precise laser-cut screen protector.
iPhone SE (1st Gen) LCD and Digitizer PRO
Replace a front glass digitizer panel and IPS LCD display compatible with a 1st generation iPhone SE smartphone model A1662, A1723, A1724. Includes the Speaker Mesh, Prox...
iPhone SE (1st Gen) Lightning Connector and Headphone Jack
This lightning connector assembly includes the lightning connector, primary microphone, and headphone jack and is compatible with 1st generation iPhone SE models.
iPhone SE (1st Gen) Home Button Assembly
Replace a home button assembly compatible with a 1st generation iPhone SE. Part #821-2092-A.
iPhone 5/5s/SE (1st Gen) Bottom Screws
Replace a stripped or missing bottom exterior screw compatible with an iPhone 5, iPhone 5s, or 1st generation iPhone SE.
Device Info
The iPhone SE, released March 31, 2016, is Apple's successor to the iPhone 5S as a low-cost alternative to their flagship iPhone 6s/6s Plus lineup. Like the iPhone 5S, the SE features a 4-inch, 1130-by-640 Retina display and TouchID sensor in the exact same form factor. Internally, the SE has the same A9 processor and 12-megapixel iSight camera as the 6s/6s Plus, but does not lacks a 3D touch display.
Model A1723 is intended for the US carrier Sprint and for and for most global carriers.