iPhone 7 Adhesive Pads
Grab a toolkit for your iPhone 7 model and fix your broken phone!
iFixit has you covered with parts, tools, and free repair guides. Repair with confidence! All of our replacement parts are tested to rigorous standards and backed by our industry-leading warranty.
Choose Category
- All
- Accessories
- Adapters
- Adhesive Pads
- Adhesive Strips
- Antennas
- Batteries
- Buttons
- Cables
- Cameras
- Case Components
- Clips
- Display Components
- Dock Connectors
- Flash
- Gripping
- iFixit Exclusives
- iFixit Gear
- Lenses
- Lightning Connector
- Logic Boards
- Microsoldering
- Prying and Opening
- Screens
- Screws
- Sensors
- SIM
- Speakers
- Test Cables
- Toolkits
- Vibrators
Choose your model of iPhone 7:
Parts that work with iPhone 7:
iPhone 7 Lightning Port Gasket
Replace the adhesive backed foam gasket for the lightning port of an iPhone 7.
iPhone 7 LCD Connector Foam Pads
Replace the adhesive backed foam spacer on the back of the LCD cable connector in an iPhone 7. Set of 5 pads.
iPhone 7 Digitizer Cable Connector Foam Pads
Replace the adhesive backed foam spacer on the back of the digitizer cable connector in an iPhone 7. Set of 5 pads.
iPhone 7 Audio Control Cable Connector Foam Pads
Replace the adhesive backed foam spacer on the back of the logic board connector for the audio control and power button cable in an iPhone 7. Set of 5 pads.
iPhone 7 Front Camera Connector Foam Pads
Replace the adhesive backed foam spacer on the back of the front-facing camera and sensor cable connector in an iPhone 7. Set of 5 pads.
iPhone 7 Loudspeaker Gaskets
Replace the adhesive backed foam gasket for the loudspeaker opening of an iPhone 7. Set of 5 gaskets.
iPhone 7 Rear Camera Foam Pads
Replace the adhesive backed foam pad between the rear-facing camera and the rear case of an iPhone 7. Set of 5 gaskets.
iPhone 7 Battery Cable Connector Foam Pads
Replace the adhesive backed foam spacer on the back of the battery cable connector in an iPhone 7. Set of 5 pads.
iPhone 7 Lightning Port Connector Foam Pads
Replace the adhesive backed foam spacer on the back of the logic board connector for the lightning port assembly in an iPhone 7. Set of 5 pads.
Device Info
The successor to the iPhone 6s, the iPhone 7 was formally announced by Apple on September 7, 2016. New features include a quad-core system-on-chip with improved system and graphics performance, an updated display, and a much applauded water resistance. Additional features include stereo speakers and upgraded cameras. The phone is lacking a headphone jack, but an adapter allows headphones to connect to the Lightning port.
There are four models of the iPhone 7. Model A1660 is available in China and the US. In the US it is available unlocked but subsidized with a 2 year contract with Verizon or Sprint, or contract free with various pricing plans. Model A1778 is available globally and in the US. In the US it is available unlocked but subsidized with a 2 year AT&T contract, or contract free for AT&T or T-Mobile. Model A1779 is available in Japan unlocked and contract-free. Model A1780 is available in China for the China Mobile network.