iPhone 7 A1660 Parts
Parts that work with iPhone 7 A1660:
iPhone 7 Top Left Antenna
Replace a missing or damaged antenna contact assembly in the top left of the rear case and fix cellular connectivity problems.
iPhone 7 Rear Camera Lock Bracket
This metal bracket secures the rear facing camera to the display assembly.
iPhone 7 Earpiece Speaker Bracket
This metal bracket secures the earpiece speaker to the display assembly.
iPhone 7/7 Plus Bottom Screws
Replace the screws in the bottom exterior of an iPhone 7 or 7 Plus.
iPhone 7 Display Assembly Adhesive
This custom cut adhesive film secures the front screen display assembly to the case of an iPhone 7.
iPhone 6s/6s Plus/7/7 Plus Bottom Screws
Replace the 2 screws in the bottom exterior of your phone. Compatible with an iPhone 6s, iPhone 6s Plus, iPhone 7, or iPhone 7 Plus.
USB Power Adapter for iPhone and iPod
5W adapter used for iPhones and iPods.
iPhone 7 Wi-Fi Diversity Antenna
Replace the Wi-Fi antenna and cable that is stuck to the loudspeaker in the lower right corner inside your smartphone.
iPhone 7/7 Plus Home Button Bracket
Replace a missing or bent metal bracket securing the home button assembly to the display assembly in your smartphone.
iPhone 7 Power Button Bracket
Replace a bent or missing metal bracket that secures the power switch to the inside of the rear case.
iPhone 7 Volume Button Bracket
Replace a bent or missing metal bracket that secures the volume switches to the inside of the rear case.
iPhone 7/7 Plus Lightning Connector Grounding Spring Contact
Replace the spring contact that grounds the lightning connector assembly to the back of the home button bracket.
iPhone 7 Front Panel Assembly Cable Bracket
This metal bracket secures the front panel assembly cables and the battery cable to the logic board.
iPhone 7 Upper Cable Bracket
This metal bracket secures the audio control and power button cable connector to the logic board.
iPhone 7 Rear Camera Connector Bracket
This metal bracket secures the rear-facing camera connector to the logic board.
iPhone 7 Rear Camera Lens Cover
Replace a scratched external lens cover for the rear-facing camera.
iPhone 6s/6s+/7 Backlight Driver LM3539
Replace a LM3539 backlight driver on the logic board of an iPhone 6s, iPhone 6s Plus, or iPhone 7. This part requires micro soldering.
iPhone 6/6s/7 Backlight Diode
Replace the backlight diode on the logic board of an iPhone 6, iPhone 6s, iPhone 6s, or iPhone 7. This part requires micro soldering.
iPhone Tigris SN2400B0 Charging IC
Replace an SN2400B0 charging IC on the logic board of an iPhone 6, iPhone 6 Plus, iPhone 6s, iPhone 6s Plus, iPhone 7, or iPhone 7 Plus. This part requires micro solderin...
iPhone Display PMU 65730A0P
Replace a 65730A0P display PMU on the logic board of an iPhone 5c, iPhone 5s, iPhone 6, iPhone 6 Plus, iPhone 6s, iPhone 6s Plus, iPhone 7, or iPhone 7 Plus. This part re...
iPhone and iPad LCD Data Choke
Replace a LCD data choke on the logic board of an iPhone or iPad. This part requires micro soldering.
iPhone 7 Flash Bracket
This metal bracket secures the camera flash to the rear case.
iPhone 7 Earpiece Speaker Mesh Bracket
Replace the plastic bracket that holds the earpiece speaker opening mesh in place against the inside of the front panel assembly.
iPhone 7 Lightning Port Bezel
Replace a damaged or missing dock port edge bezel.
iPhone 7 Front Camera and Sensor Holders
These plastic guides center the front-facing camera and the ambient light sensor over the openings in the front glass panel.
iPhone 6/6s/7 Battery Adhesive Strips
Use these custom adhesive strips to secure the battery of an iPhone 6, iPhone 6s, or iPhone 7 to the rear case.
iPhone 7 Battery Connector
Replace a damaged or corroded battery cable connector on the logic board of an iPhone 6 Plus.
iPhone 7 Speaker and Microphone Mesh Set
Replace the mesh covers for the speaker, vent, and microphone openings.
iPhone 7/7 Plus Power/Volume Button Retaining Clips
Replace the internal clips that hold the external button covers in place. Set of three.
iPhone 7 Earpiece Speaker Mesh
Replace the mesh that covers the earpiece speaker opening in the iPhone 7.
iPhone 7 Earpiece Speaker Gasket
Replace the gasket that seals the face of the earpiece speaker to the back of the earpiece speaker dust proof mesh bracket on the inside of the front panel assembly.
iPhone 7 Flash Diffuser
Replace a scratched or missing camera flash diffuser lens.
iPhone 7 Earpiece Speaker Mesh Adhesive
This custom cut adhesive film secures the earpiece speaker anti-dust mesh bracket to the front panel of an iPhone 7.
Externally, the Apple iPhone 7 is very similar to its predecessor. Other than a smoother look and a change in antenna band placement, not much has changed. However internally this phone is full of aggressive breaks from convention. Everything inside the new iPhone’s casing is a statement about the future of this phone. The home button is no longer a physical button, but rather full of pressure sensors and haptic vibration motors that simulate the feel of a button. The new A10 Fusion processor blends two high power cores that rival laptop performance along with two low power cores that combine with a much larger capacity battery to extend lifetime by up to two hours. This generation of iPhone has also seen the headphone jack removed, and in its place, new stereo speakers.
iPhone 7 Model A1660 is the global variant having both CDMA and GSM support. The markets where this model is available include United States, Puerto Rico, Hong Kong and China. The SIM-free version will also have this model number, while in the U.S., Verizon and Sprint offer the iPhone 7 with A1660 model. This phone supports 19 FDD-LTE bands, 4 TD-LTE bands, 2 SCDMA bands, 4 CDMA bands, 4 GSM bands, and 5 UMTS bands.
The most commonly needed repair for the iPhone 7 are cracked screens and dead battery replacements. iFixit has the best iPhone 7 screens and iPhone 7 batteries on the market, along with a complete catalog of various other iPhone 7 parts for the less common repairs.
All iPhone 7 repairs will require a Pentalobe P2 screwdriver and Tripoint screwdriver in addition to standard precision electronics tools. Any repair that removes the battery from the chassis will require replacement adhesive strips. New to iPhone repairs is the iPhone 7 display assembly adhesive, that will need to be purchased for any repair that removes the front screen. Since the iPhone 7 is water resistant, a new screen adhesive will be required in order to retain its resistance to water damage. All iFixit Fix Kits come with all tools and replacement adhesive needed to complete your desired repair.
Once all parts and tools have been acquired, head to iFixit’s iPhone 7 repair guides for step-by-step instructions on how to make the fix.
The iPhone 7 earned a 7 out of 10 in iFixit’s repairability assessment. Watch the Teardown Review for more: