iPhone 7 A1660 Parts
Grab a toolkit for your iPhone 7 A1660 model and fix your broken phone!
iFixit has you covered with parts, tools, and free repair guides. Repair with confidence! All of our replacement parts are tested to rigorous standards and backed by our industry-leading warranty.
iPhone 7 Lightning Port Bezel
Replace a damaged or missing dock port edge bezel.
iPhone 7/7 Plus SIM Card Slot/Reader
Replace a damaged SIM card tray holder socket on the logic board of an iPhone 7 or 7 Plus. This part requires micro soldering.
iPhone 7 Rear Camera Foam Pads
Replace the adhesive backed foam pad between the rear-facing camera and the rear case of an iPhone 7. Set of 5 gaskets.
iPhone 7 Bare Logic Board
This is only the board to which all the surface soldered components would be mounted. This part does not include any other components.
iPhone 7 Rear Camera Case Alignment Bracket
Replace the metal bracket that holds the lens end of the rear-facing camera in place in the rear case.
iPhone 7 Audio Control Cable and Brackets
Replace the internal audio and power switches and their brackets.
iPhone 7 OEM Rear Case
Replace a scratched or dented aluminum rear case.
iPhone 7 Earpiece Speaker Mesh Adhesive
This custom cut adhesive film secures the earpiece speaker anti-dust mesh bracket to the front panel of an iPhone 7.
iPhone 7 Flash Bracket
This metal bracket secures the camera flash to the rear case.
iPhone 7/7 Plus Power and Volume Button Gaskets
Replace a torn or missing gasket on one of the power or volume button face posts for an iPhone 7 or iPhone 7 Plus. Set of six gaskets.
iPhone 7 Lightning Port Connector Foam Pads
Replace the adhesive backed foam spacer on the back of the logic board connector for the lightning port assembly in an iPhone 7. Set of 5 pads.
iPhone 7 Case Button Set
This set of exterior case buttons includes the Power/Lock Button, Volume Buttons, and Vibrate/Ring Switch.
iPhone Tigris SN2400B0 Charging IC
Replace an SN2400B0 charging IC on the logic board of an iPhone 6, iPhone 6 Plus, iPhone 6s, iPhone 6s Plus, iPhone 7, or iPhone 7 Plus. This part requires micro solderin...
iPhone 7 Rear Camera Connector Bracket
This metal bracket secures the rear-facing camera connector to the logic board.
iPhone 7 Loudspeaker Gaskets
Replace the adhesive backed foam gasket for the loudspeaker opening of an iPhone 7. Set of 5 gaskets.
iPhone 7 Audio Control Cable Connector Foam Pads
Replace the adhesive backed foam spacer on the back of the logic board connector for the audio control and power button cable in an iPhone 7. Set of 5 pads.
iPhone 7 Used LCD and Digitizer
Replace a scratched or cracked front glass panel or malfunctioning display, front-facing camera, or earpiece speaker for your iPhone.
iPhone 6/6s/7 Backlight Diode
Replace the backlight diode on the logic board of an iPhone 6, iPhone 6s, iPhone 6s, or iPhone 7. This part requires micro soldering.
iPhone 7 Upper Cable Bracket
This metal bracket secures the audio control and power button cable connector to the logic board.
iPhone 7 Front Camera Connector Foam Pads
Replace the adhesive backed foam spacer on the back of the front-facing camera and sensor cable connector in an iPhone 7. Set of 5 pads.
iPhone 7 Flash Diffuser
Replace a scratched or missing camera flash diffuser lens.
iPhone 7 Front Panel Assembly Cable Bracket
This metal bracket secures the front panel assembly cables and the battery cable to the logic board.
iPhone 7 Test Cable for LCD Screen and Digitizer
This test cable simplifies connecting and testing LCDs and digitizers for the iPhone 7.
iPhone 7 LCD Connector Foam Pads
Replace the adhesive backed foam spacer on the back of the LCD cable connector in an iPhone 7. Set of 5 pads.
iPhone 7 Earpiece Speaker Gasket
Replace the gasket that seals the face of the earpiece speaker to the back of the earpiece speaker dust proof mesh bracket on the inside of the front panel assembly.
iPhone 7 Display Backlight
Replace the backlight film on the display assembly. Compatible with an iPhone 7. This part requires micro soldering.
iPhone 6s/6s Plus/7/7 Plus Backlight Filter
Replace a backlight filter on the logic board of an iPhone 6s, iPhone 6s Plus, iPhone 7, or iPhone 7 Plus. This part requires micro soldering.
iPhone 7 Rear Camera Lock Bracket
This metal bracket secures the rear facing camera to the display assembly.
iPhone 7 Battery Connector
Replace a damaged or corroded battery cable connector on the logic board of an iPhone 6 Plus.
iPhone 7 Digitizer Cable Connector Foam Pads
Replace the adhesive backed foam spacer on the back of the digitizer cable connector in an iPhone 7. Set of 5 pads.
iPhone 7 Earpiece Speaker Mesh Bracket
Replace the plastic bracket that holds the earpiece speaker opening mesh in place against the inside of the front panel assembly.
iPhone 6s/6s+/7 Backlight Driver LM3539
Replace a LM3539 backlight driver on the logic board of an iPhone 6s, iPhone 6s Plus, or iPhone 7. This part requires micro soldering.
iPhone 7 Front Camera and Sensor Holders
These plastic guides center the front-facing camera and the ambient light sensor over the openings in the front glass panel.
Externally, the Apple iPhone 7 is very similar to its predecessor. Other than a smoother look and a change in antenna band placement, not much has changed. However internally this phone is full of aggressive breaks from convention. Everything inside the new iPhone’s casing is a statement about the future of this phone. The home button is no longer a physical button, but rather full of pressure sensors and haptic vibration motors that simulate the feel of a button. The new A10 Fusion processor blends two high power cores that rival laptop performance along with two low power cores that combine with a much larger capacity battery to extend lifetime by up to two hours. This generation of iPhone has also seen the headphone jack removed, and in its place, new stereo speakers.
iPhone 7 Model A1660 is the global variant having both CDMA and GSM support. The markets where this model is available include United States, Puerto Rico, Hong Kong and China. The SIM-free version will also have this model number, while in the U.S., Verizon and Sprint offer the iPhone 7 with A1660 model. This phone supports 19 FDD-LTE bands, 4 TD-LTE bands, 2 SCDMA bands, 4 CDMA bands, 4 GSM bands, and 5 UMTS bands.
The most commonly needed repair for the iPhone 7 are cracked screens and dead battery replacements. iFixit has the best iPhone 7 screens and iPhone 7 batteries on the market, along with a complete catalog of various other iPhone 7 parts for the less common repairs.
All iPhone 7 repairs will require a Pentalobe P2 screwdriver and Tripoint screwdriver in addition to standard precision electronics tools. Any repair that removes the battery from the chassis will require replacement adhesive strips. New to iPhone repairs is the iPhone 7 display assembly adhesive, that will need to be purchased for any repair that removes the front screen. Since the iPhone 7 is water resistant, a new screen adhesive will be required in order to retain its resistance to water damage. All iFixit Fix Kits come with all tools and replacement adhesive needed to complete your desired repair.
Once all parts and tools have been acquired, head to iFixit’s iPhone 7 repair guides for step-by-step instructions on how to make the fix.
The iPhone 7 earned a 7 out of 10 in iFixit’s repairability assessment. Watch the Teardown Review for more: