Tablet Parts - Page 40

Replace a scratched or missing plastic external lock/silent switch face. This part is compatible with an iPad 2, 3, or 4. The internal cable and switch are not included.

Replace a logic board (motherboard) compatible with the 4th Generation iPad. Fix processing issues like unexpected shutdowns, reboots or water damage.

Replace a logic board (motherboard) compatible with the iPad 3 Wi-Fi. Fix processing issues like unexpected shutdowns, reboots or water damage.

Replace a dirty, corroded, or damaged headphone jack assembly. This part is compatible with the 3rd generation 4G iPad.

Replace a lightning connector compatible with the 4th Generation iPad Retina model A1458, A1459, and A1460. Fix problems with charging and data transfer.

Fix a broken or damaged microphone. This part is compatible with a 3rd generation, Wi-Fi only iPad.

Replace an exterior plastic home button face compatible with the iPad 3 Retina model A1416, A1430, and A1403.

Replace the global position system (GPS) antenna compatible with the A1416, A1430, and A1403 3rd Generation Retina iPad tablet. Part #821-1318-A, 821-1318.

Replace an LCD filter L2201 on the logic board of an iPad 2, iPad 3, iPad 4, iPad mini, or iPad mini 2. This part requires micro-soldering.

Replace a logic board compatible with the CDMA/Verizon model iPad 2. Fix processing issues like unexpected shutdowns, reboots or water damage.

Replace a CDMA / Verizon left cellular antenna compatible with the A1397 model Cellular 2nd Generation iPad tablet.

Replace a bent or missing SIM card tray for the GSM/AT&T iPad 2.

Replace a logic board compatible with the GSM model iPad 2 tablet. Fix processing issues like unexpected shutdowns, reboots or water damage.

Replace the backlight diode on the logic board of an iPad 2, 3, 4, or 1st or 2nd generation iPad mini. This part requires micro soldering.

Replace the backlight filter on the logic board of an iPad 2, 3, 4, or 1st or 2nd generation iPad mini. This part requires micro soldering.

Replace a U2 IC on the logic board of a 2nd or 3rd generation iPad. This part requires microsoldering.

Replace the LCD FPC connector on the logic board of a 2nd generation iPad. This part requires microsoldering.

Replace the a digitizer cable FPC connector on the logic board of an iPad 2, 3, or 4. The digitizer cable is inserted into two of these connectors on the logic board. This part requires microsoldering.

This headphone jack assembly is compatible with EMC 2560 Wi-Fi version of the iPad 2.

Replace a logic board compatible with the EMC 2415 model iPad 2 Wi-Fi tablet. Fix processing issues like unexpected shutdowns, reboots or water damage.

Replace the metal retaining clip bracket and thermal pad that fit over the rear-facing camera compatible with the 2nd Generation iPad model A1395, A1396, and A1397.

Replace the plastic enclosure for the rear facing camera compatible with the 2nd Generation iPad model A1395, A1396, and A1397.

Replace a logic board compatible with the iPad 2 Wi-Fi 16 GB EMC 2560. Fix processing issues like unexpected shutdowns, reboots or water damage.

This blank rear aluminum panel fits model A1395 iPad 2 EMC 2415.