Replace the lightning connector and its cable compatible with the A1701 and A1709 model 10.5 inch iPad Pro. Fix problems with charging and USB device connectivity. Installing this part requires micro-soldering.

Replace a corroded or damaged lightning connector in your 1st generation iPad Air model A1474 and A1475. Fix problems with charging and connecting to USB devices.

Replace the digitizer cable connector on the logic board of an iPad mini 3. This part requires microsoldering.

Replace the backlight filter on the logic board of a 1st generation iPad Air. This part requires micro soldering.

Replace the home button cable FPC connector on the logic board of a 1st generation iPad Air. This part requires microsoldering.

Replace a A1610A1, A1610A2, or A1610A3 USB IC on the logic board of an iPhone 5c, iPhone 5s, iPhone 6, iPhone 6 Plus, iPhone 6s, iPhone 6s Plus, iPad Air, or iPad mini 2. This part requires micro soldering.

Replace the FL7500 filter, the "Gas Gauge Filter," on the logic board of a 1st generation iPad mini. This part requires micro soldering.

Replace the digitizer cable connector on the logic board of an iPad mini. This part requires microsoldering.

Replace a LCD data choke on the logic board of an iPhone or iPad. This part requires micro soldering.

Replace a damaged or corroded audio cable FPC connector on the logic board of a 3rd or 4th generation iPad. This part requires microsoldering.

Replace the home button cable connector on the logic board of a 4th generation iPad. This part requires microsoldering.

Replace a damaged U2 IC. This component is compatible with an iPad 4. This part requires microsoldering.

Replace an LCD filter L2201 on the logic board of an iPad 2, iPad 3, iPad 4, iPad mini, or iPad mini 2. This part requires micro-soldering.

Replace the backlight diode on the logic board of an iPad 2, 3, 4, or 1st or 2nd generation iPad mini. This part requires micro soldering.

Replace the backlight filter on the logic board of an iPad 2, 3, 4, or 1st or 2nd generation iPad mini. This part requires micro soldering.

Replace a U2 IC on the logic board of a 2nd or 3rd generation iPad. This part requires microsoldering.

Replace the LCD FPC connector on the logic board of a 2nd generation iPad. This part requires microsoldering.

Replace the a digitizer cable FPC connector on the logic board of an iPad 2, 3, or 4. The digitizer cable is inserted into two of these connectors on the logic board. This part requires microsoldering.