Apple Smartwatch Adhesives

Replace an adhesive strip compatible with 44 mm Series 6 Apple Watch models A2292, A2294, A2376. Ensure a tight seal between the case and the display.

Replace an adhesive strip compatible with 45 mm Series 7 Apple Watch models A2474, A2477, A2478. Ensure a tight seal between the case and the display.

Replace the adhesive strip compatible with the 40 mm case Series 4 or Series 5 Apple Watch model #A1975, A1977, A2007, A2092, A2094, and A2156.

Replace the adhesive film that secures the rear panel to the case compatible with Apple Watch (45 mm Series 7) model smartwatches. Complete your replacement of the rear cover with new adhesive. There is no measuring, cutting, trimming, or shaping

Replace the force touch sensor and adhesive that fits between the display and rear case of specific models of the Apple Watch. Fits 38mm Series 2 and Series 3 Cellular models. Model numbers A1757, A1816, A1860, A1889, and A1890.

Replace an adhesive strip compatible with 41 mm Series 7 Apple Watch models A2473, A2475, A2476. Ensure a tight seal between the case and the display.

Replace the adhesive strip compatible with the 42 mm case Apple Watch Original, Series 1, and 2 models #A1554, A1758, A1803, and A1817.

Replace an adhesive strip compatible with 45 mm Series 8 Apple Watch models A2858, A2775, A2774, A2771. Ensure a tight seal between the case and the display.

Replace the force touch sensor and adhesive gasket that secures the display to the rear case compatible with the 42 mm Apple Watch Original model and Series 1 model A1554 and A1803.

Replace an adhesive strip compatible with 41 mm Series 8 Apple Watch models A2857, A2773, A2772, A2770. Ensure a tight seal between the case and the display.

Replace the adhesive film that secures the rear panel to the case compatible with Apple Watch (40 mm Series 6) model smartwatches. Complete your replacement of the rear cover with new adhesive. There is no measuring, cutting, trimming, or shaping

Replace an adhesive strip compatible with the 38 mm case Apple Watch Original model and Series 1 and 2 models.

Replace three heat dissipation stickers inside a 44mm Series 6 Apple Watch.

Replace three heat dissipation stickers inside a 40mm Series 6 Apple Watch.

Replace the adhesive film that secures the rear panel to the case compatible with Apple Watch (44 mm Series 6) model smartwatches. Complete your replacement of the rear cover with new adhesive. There is no measuring, cutting, trimming, or shaping

Replace the force touch sensor and adhesive that fits between the display and rear case compatible with the 38 mm Series 3 GPS Only model Apple Watch model A1858.

Replace the force touch sensor and adhesive gasket that secures the display to the rear case compatible with the 42 mm Series 3 GPS Only model Apple Watch model A1859.

Replace the custom adhesive patch that secures the wireless charging coil to the case compatible with the 38mm Series 3 Apple Watch model A1858, A1860, A1889, and A1890.

Replace the custom adhesive strips to secure the logic board for inside the case compatible with the 38mm Series 3 Apple Watch model A1858, A1860, A1889, and A1890.

Replace a torn or missing black sticker on the back of the display of a Series 2 or Series 3 38mm model Apple Watch with this set of two stickers. One sticker bridges the three EMI shields. The other sticker bridges the three cables from the logic

Replace a torn or missing black sticker on the back of the display of a Series 2 or Series 3 42mm model Apple Watch with this set of two stickers. One sticker bridges the three EMI shields. The other sticker bridges the three cables from the logic

Replace the force touch sensor and adhesive that fits between the display and rear case of specific models of the Apple Watch. Fits 42mm Series 2 and Series 3 Cellular models. Model numbers A1758, A1817, A1861, A1891, and A1892.

Replace the force touch sensor and adhesive gasket that secures the display to the rear case compatible with the 38 mm Apple Watch Original model and Series 1 model A1553 and A1802.

Replace the adhesive film that secures the rear panel to the case compatible with Apple Watch (41 mm Series 7) model smartwatches. Complete your replacement of the rear cover with new adhesive. There is no measuring, cutting, trimming, or shaping