Phone Case Components - Page 9

Replace a cracked or scratched glass panel on the upper half of the back of a Google Pixel XL smartphone.

Replace the tray that holds the SIM and SD cards.

Replace a scratched or bent metal midframe for a Galaxy S8.

Replace a scratched or missing camera flash diffuser lens in a Galaxy S8+.

Replace a scratched or missing camera flash diffuser lens in a Galaxy S8.

Replace the metal bezel and lens cover for the rear-facing camera compatible with the Samsung Galaxy S8+ smartphone. Fix camera image problems caused by a scratched lens cover.

Replace a scratched edge bezel or a bent metal midframe for a Samsung Galaxy S8+.

Replace the metal bezel and lens cover for the rear-facing camera compatible with the Samsung Galaxy S8 smartphone. Fix camera image problems caused by a scratched lens cover.

Replace a scratched or cracked rear panel on a Samsung Galaxy S8.

Replace the four cable connector retaining brackets.

We live to share gadget guts with the world. Now you can show off the insides of your iPhone 7 Plus with a new Insight iPhone Teardown Case.

This replacement rear case includes no internal components and has no logo or text.

Replace the mesh covers for the speaker, vent, and microphone openings. Mesh covers are part of the water and dust ingress protection for the phone.

This tray holds the nano SIM card and is inserted on the side of the phone.

Replace the gasket that seals the earpiece speaker mesh bracket assembly against the back of the earpiece speaker compatible with the iPhone 7 Plus model #A1661, A1784, A1785, A1786.

Replace the earpiece speaker plastic bracket, speaker gasket, opening mesh, and its adhesive on the inside of the front panel assembly compatible with the iPhone 7 Plus model #A1661, A1784, A1785, A1786.

This metal bracket secures the front panel assembly cables and the battery cable to the logic board.

This metal bracket secures the camera flash to the rear case.

Replace a bent or missing metal bracket that secures the earpiece speaker to the back of the display assembly compatible with the iPhone 7 Plus model #A1661, A1784, A1785, A1786.

Replace the plastic bracket that holds the earpiece speaker opening mesh in place against the inside of the front panel assembly compatible with iPhone 7 Plus model #A1661, A1784, A1785, A1786.

Replace a scratched or missing camera flash diffuser lens.

Replace the mesh that covers the earpiece speaker opening compatible with the iPhone 7 Plus model #A1661, A1784, A1785, A1786.

These plastic guides center the front-facing camera and the ambient light sensor over the openings in the front glass panel.

Replace a bent or missing metal bracket that secures the power switch to the inside of the rear case.