Phone Case Components - Page 10

Replace a metal bracket that secures the rear facing camera to the display assembly compatible with the iPhone 7.

This metal bracket secures the front panel assembly cables and the battery cable to the logic board.

This metal bracket secures the audio control and power button cable connector to the logic board.

Replace the metal bracket that secures the rear-facing camera connector to the logic board compatible with iPhone 7.

This metal bracket secures the camera flash to the rear case.

Replace a missing or bent metal bracket securing the home button assembly to the display assembly in your smartphone.

Replace a metal bracket that secures the earpiece speaker to the display assembly compatible with the iPhone 7 model #A1660, A1778, A1779, A1780.

Replace the metal plate between the LCD and the other internal parts compatible with the iPhone 7 model A1660, A1778, A1779, and A1780 smartphone. This plate diffuses excess heat, and protects the back of the LCD.

Replace the plastic bracket that holds the earpiece speaker opening mesh in place against the inside of the front panel assembly compatible with the iPhone 7.

Replace the gasket that seals the face of the earpiece speaker to the back of the earpiece speaker dust proof mesh bracket on the inside of the front panel assembly compatible with the iPhone 7 model A1660, A1778, A1779, A1780.

Replace a scratched or missing camera flash diffuser lens.

Replace a dock port edge bezel compatible with the iPhone 7.

Replace the metal bracket that holds the lens end of the rear-facing camera in place in the rear case compatible with the iPhone 7.

Replace an external lens cover for the rear-facing camera compatible with the iPhone 7.

These plastic guides center the front-facing camera and the ambient light sensor over the openings in the front glass panel.

Replace a bent or missing SIM card tray for an iPhone 7. This tray holds the nano SIM card and is inserted on the side of the phone.

Replace a dirty, corroded, or damaged charging port for the OnePlus One smartphone.

Replace a cracked or scratched rear panel for a Samsung Galaxy S7 Edge smartphone.

Replace a broken or damaged metal midframe assembly in your Samsung Galaxy S7 Edge with this part. This assembly includes the motherboard heat pipe, the internal power and volume button switches, and the external power and volume button covers.

Replace the tiny metal grille that covers the earpiece speaker opening.

Replace the midframe assembly for a Samsung Galaxy S7.

Replace the tray that holds the SIM and SD cards of a Galaxy S7 Edge model smartphone.

Replace a damaged SIM card socket on the motherboard of a Galaxy S7 or S7 Edge with this part.

Replace the tray that holds the SIM and SD cards.