Apple Watch Parts - Page 5

Replace a LCD connector cover compatible with the 38 mm or 42 mm Original or Series 1 Apple Watch smartwatch models A1553, A1554, A1802, and A1803.

This flex cable connects the display and digitizer to the processor. This part requires surface soldering.

This flex cable connects the battery and force touch sensor to the processor and includes the microphone. This part requires surface soldering.

This flex cable connects the battery and force touch sensor to the processor and includes the microphone. This part requires surface soldering.

Fix problems with vibration alerts and haptic feedback by replacing a malfunctioning linear oscillator motor. This part is compatible with a 45mm Series 7 Apple Watch.

Fix problems with vibration alerts and haptic feedback by replacing a malfunctioning linear oscillator motor. This part is compatible with a 41mm Series 7 Apple Watch.

Replace a damaged or malfunctioning speaker compatible with a 41mm Series 7 Apple Watch.

Replace the adhesive film that secures the rear panel to the case compatible with Apple Watch (41 mm Series 7) model smartwatches. Complete your replacement of the rear cover with new adhesive. There is no measuring, cutting, trimming, or shaping

Use this custom adhesive patch to secure the battery compatible with an Original or Series 1-6 Apple Watch model A1553, A1554, A1802, A1803, A1816, A1817, A1858, A1859, A1860, A1860, A1861, A1861, A1889, A1889, A1890, A1890, A1891, A1891, A1892

Replace a adhesive strip compatible with the 38 mm Series 3 Apple Watch model A1858, A1860, A1889, and A1890.

Replace the adhesive strip compatible with the 42 mm case Series 3 Apple Watch model A1859, A1861, A1891, and A1892.

Replace an adhesive strip compatible with the 44 mm case Series 4 or Series 5 Apple Watch model A1976, A1978, A2008, A2093, A2095, and A2157.

Replace a damaged or malfunctioning force touch sensor that fits between the display and rear case of a 44 mm Series 4 Apple Watch.

Set of screws for the 38 mm or 42 mm Series 1 or Series 2 Apple Watch.

Set of screws for the 38 mm or 42 mm Original Apple Watch.

This plastic rear cover includes 4 sensor lenses.