Model A1174 with 2 GHz Core Duo or Model A1207 with 2.16 or 2.33 GHz Core 2 Duo

275 Questions View all

The wires of the HDD thermal sensor cable connector came out

I pulled the wires out of the connector on the logic board in step # 17 off the HDD replacement. Does anybody now the right order to get the wires in the connector.

Or mayby is their a picture of the hdd thermal sensor cable in which I can see where each wire should be in the cnnector??

TIA Henk

Answered! View the answer I have this problem too

Is this a good question?

Score 0


I saw the picture in #17, but I ment a picture of the entire cable so you can see how the wires are connected.

But does anyone now where to buy such a cable in the Netherlands??



Add a comment

1 Answer

Chosen Solution

Here's a picture in step #17: iMac Intel 20" EMC 2105 and 2118 Hard Drive Replacement

Problem is the wires are all the same color. When I pulled them out I connected them back in the same order as on the sensor. It worked for me once, the next time I just order a new one in.

Was this answer helpful?

Score 2


good answer +


Add a comment

Add your answer

Henk will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 1,276