Released April 2010 / 2.4, 2.53 GHz Core i5 or 2.66, 2.8 GHz Core i7 Processors

560 Questions View all

Optibay installation - super driver connector strip

When trying to remove the superdrive for optibay replacement the connector which connects to superdrive had a small rubber like thing. when lifting the connector the one mentioned in the picture came out rubber piecesticked with the motherboard and it did not came out with the connector. will it be a problem?....i mean the rubber thing stayed in the motherboard. after replacing with optibay i putback the things and it works fine. when next time if have to remove the optibay do i have to be careful that rubber thing should not stay on motherboard. please let me know. thanks

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Chosen Solution

It sounds to me like the rubber thing is in exactly the right place. I don't know why you would want to replace the optibay but if you do so the rubber thing will still be in the correct position. I wouldn't change a thing.

Was this answer helpful?

Score 0
Add a comment

Add your answer

kool sand will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 7,025