Hello,
I was all set to replace the battery when I found that one of the screws inside the 4S was stripped (the philips head must have been tighter too hard and now I can not get it off...
Any advice about what my options are would be appreciated...
Thank you in advance...
Is this a good question?
Rep: 30.6k
25
71
41
Stripped screws always come off, no matter how frustrating. Try different tools, torx, phillips head of slightly bigger/smaller size, try using a dremel to make a tiny ledge so you can get some leverage. Get it to turn a bit and then use pliers. It seems impossible, but it will come off.
Was this answer helpful?
Rep: 37.6k
22
51
42
Yip most frustrating thing is a striped screw but do what jessa says because it will eventually come loose
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 1
Past 30 Days: 1
All Time: 47
