/
/

Free Shipping on Domestic Orders $75+

Edit
Kodak PIXPRO WPZ2 Flash Will Not Turn On

Kodak PIXPRO WPZ2 Flash Will Not Turn On

Hope McCluggage and 1 contributor
Last updated on

If the flash in your Kodak PIXPRO WPZ2 is unresponsive and doesn't go off when enabled, follow this troubleshooting page for potential solutions.

Causes

1

Incorrect Settings Selected

Check to see if it is in "Auto Mode." In Auto Mode, the camera will automatically decide whether to use the flash, and you cannot manually turn it on.

Switch to a mode like Program AE, Manual Mode, or Scene Mode (SCN) to gain control to use the flash setting.

2

Electronic Glitch

A simple reset or power cycle can resolve temporary electronic glitches.

  1. Remove the battery from the compartment.
    1. Press and hold the Power Button for 30 seconds.
      1. Reinsert the battery.
        1. Attempt to turn the camera on.
3

 Flash Assembly Failure

If you have performed all these steps and the flash still does not work the camera may have a hardware malfunction or damage.

Describe your problem in your own words

Ask FixBot
View statistics:
Past 24 Hours:5
Past 7 Days:47
Past 30 Days:265
All Time:2,963