iPad 1st Gen
SIM Card Eject Tool
Safely eject the SIM card from Apple GSM/LTE devices (iPhones and iPads) and other electronic devices.
iPad USB 10W AC Adapter (Original)
Charge your iPad with AC power. This is an OEM original Apple model A1357 adapter.
iPad LCD Panel
This is the LCD display screen of 1st generation iPad Wi-Fi. This does not include the front glass digitizer panel.
iPad Display Clip Set
Replace the broken or missing spring clips on the back of the 1st generation iPad display screen.
iPad Headphone Jack/Microphone Assembly
This assembly includes the headphone jack and microphone for 1st generation iPad Wi-Fi.
iPad Power Button
This is the external plastic power button cover. It does not include the internal power button switch.
iPad 3G Front Panel Digitizer Assembly
Touch portion of display with the frame, antenna, home button and clips.
iPad 3G (1st Gen) Logic Board
Replace a broken or malfunctioning motherboard in a 1st Generation iPad 3G.
Replace the model A1315 battery in your 1st generation iPad.
iPad Adhesive Strips
These custom-cut adhesive strips fit between the 1st generation iPad front panel and front frame.
The first generation of the iPad established design precedents, some of which, such as the home button placement, have persisted through all models. The device features an Apple A4 processor — which is comprised of a 1 GHz processor, 256 MB of RAM and a PowerVR SGX535 GPU — and a 9.7” touchscreen display with 1024x758 pixel resolution and 132 ppi. The first generation iPad is equipped with either 16, 32, or 64GB of solid-state memory for program and data management.
There are two models of the first generation iPad. The Wi-Fi variant was released in the United States on April 3, 2010, followed by the Wi-Fi and Cellular variant on April 30, 2010. Unlike its successors, the Wi-Fi and cellular variant of the first generation iPad can only support GSM/UMTS standards and is not compatible with CDMA networks.
Select your model above for parts, guides and more.