54 Bit Driver Kit

$29.95

Product code: IF145-022

Click Image To Zoom

 
 
 
 
 
 
 

54 Bit Driver Kit

$29.95

Product code: IF145-022

Product Overview

The key to getting inside modern hardware.

  • The comprehensive standard in precision screwdriver bit sets, features 54 carefully selected bits—chosen with data collected from our thousands of free repair guides.
  • This kit forms the base of our popular Pro Tech Toolkit, the industry standard for computer repair technicians and businesses.
  • Available in an elegant and rugged magnetically-sealed wooden case.

If you're looking for replacement or legacy bits, or you just want larger and even more rare bits, be sure to also take a look at iFixit's Macro Bit Set and 4mm Screwdriver Bits. If you're looking for a slick ratcheting screwdriver that fits all the bits in the 54 Bit Driver Kit, check out Frictionless Ratchet.

Kit Contents:

  • 4 mm Aluminum Driver - featuring a magnetic socket, rubber grips, and a ball-bearing swivel top
  • Flexible Shaft Extension - snake into hard to reach places
  • 60 mm Shaft Extension - doubles as a T-handle for extra torque
  • 1/4" Adapter - use this kit's 4 mm bits in standard 1/4" drivers
  • 54 bits in the following sizes:
    • Pentalobe sizes 2, 5, 6 (iPhone, MacBook Air, MacBook Pro)
    • Flathead sizes 1, 1.5, 2, 2.5, 3, 3.5, 4 mm
    • Phillips sizes #000, #00, #0, #1, #2
    • JIS sizes 000, 00, 0, 1
    • Torx sizes T3, T4, T5, T6
    • Torx Security TR7, TR8, TR9, TR10, TR15, TR20 (compatible with non-security)
    • Hex sizes 0.7, 0.9, 1.3, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 6 mm
    • Square sizes #0, #1, #2
    • Triangle size 3 mm
    • Tri-wing sizes #0, #1
    • Nut Driver sizes 2.5, 3, 3.5, 4, 5 mm
    • SIM Eject size 0.8 mm
    • Magnetic Pickup size 4 mm

Product Details

$29.95

 

Condition:

New

$59.95 Wooden Case

 

Condition:

New

Notes:

Dimensions: 7-7/8" x 4-9/32" x 1-1/2", 200mm x 109mm x 38mm

Add to Cart
 

Product Details

Block Image

This is the set that spawned the repair revolution. We have honed its contents to be both your everyday driver set and your go-to resource for all the security bits needed to open consumer electronics.

Block Image

Each bit resides in a removable soft plastic block with five friends. The driver body is machined from a single piece of aluminum, with a ball bearing mounted swivel top. The flexible shaft is great for stereo work or other large electronics where all the screws aren’t on the surface. The drive adapter lets you use these specialty bits with any standard ¼” driver handle or most power tools.

Block Image

When it comes to precision bit sets, there is no better kit. If you want something that looks as elegant as it performs, look no further than the wooden case for the 54 Bit Driver Kit. This case is emblazoned with the Fixers Fist, reminding all the world that we have the right to open our electronics. We believe that repair is noble, and so should you.

Block Image
Block Image

Bits Included: ¶ 

  • Pentalobe sizes 2, 5, 6 (iPhone, MacBook Air, MacBook Pro)
  • Flathead sizes 1, 1.5, 2, 2.5, 3, 3.5, 4 mm
  • Phillips sizes #000, #00, #0, #1, #2
  • JIS sizes 000, 00, 0, 1
  • Torx sizes T3, T4, T5, T6
  • Torx Security TR7, TR8, TR9, TR10, TR15, TR20 (compatible with non-security)
  • Hex sizes 0.7, 0.9, 1.3, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 6 mm
  • Square sizes #0, #1, #2
  • Triangle size 3 mm
  • Tri-wing sizes #0, #1
  • Nut Driver sizes 2.5, 3, 3.5, 4, 5 mm
 

Stories

My Problem

Controller was dropped on left bumper button. After that had to press very hard to get button to work.

My Fix

repair went well. with the new driver kit and spudger. I was able to open the controller very easily with the help of the guide I found on the Ifixit site. Also found a tip on youtube on how to fix the problem.

My Advice

Found out this is a problem on older controllers where the button gets compressed from all the mashing. by adding a small piece of plastic(in my case I used a small piece cut from an old credit card) between the bumper and the button using double stick tape or glue it to the analog stick inside cover is all you need to get a good connection again.

My Problem

My iMac was overheating and making loud fan noises. After streaming 30 minutes of a movie, I had to turn it off and let it rest to cool down. I decided to search, finding out the computer has 3 fans that gets dirty with time.

My Fix

It was my first time opening a computer. The fix was smooth and easy. After cleaning every single part, I put everything back together and the problem was solved. No more overheating, no more loud fan noises and the most important of all was that, I did it myself.

My Advice

What helped me to do the job was the iFixit kit. Very important, try to draw a picture of the area that you are working on with each screw hole, placing each screw on the picture that you draw with transparent tape. Remember to connect all the wires and put all screws in the same order of your sketch.

My Problem

Because the screen was completely shattered

My Fix

It went flawless :)!!!

My Advice

Just be careful with the home button cable when taking the adhesive off

My Problem

Loose Screen Hinge

Not enough memory

Optical Drive Limited

Battery Life Nonexistent

Slow Hard Drive

CPU Temps were high

My Fix

Tightened Screen Hinge

Added 16gb Ram

Replaced Optical Drive with a Blu Ray Burner (UJ 267)

Replaced Battery

Added 256gb Samsung 850 EVO SSD

Replaced TIM on CPU Heatsink with Gelid GC Extreme

It went really well! The ifixit guides made things a lot easier and it made the entire process a breeze. It took about a good 6 hours to do everything mentioned, but it was totally worth it.

My Advice

Go slow and take time to be organized. I'm ruined hardware in the past because I was rushing or was forcing something to fit. Just go slow with whatever repair you are doing and visualize each step before you go ahead and do it.

My Problem

Old battery wouldn't hold a charge.

My Fix

The adhesive strip that holds the battery did come off as easily as expected.

My Advice

I recommend heating the back of the case to soften/loosen the adhesive no matter what. If you are cheap like me simply fill a small sock with a handful of rice and microwave it for 1 minute and then place the warm sock on the back of the iPhone case before you attempt to remove the adhesive strips.

My Problem

We were sold the wrong Macbook power adapter, and for a year and a half it's been plugged in.

The problems started with a faulty trackpad and ended with being unable to charge the device.

When the track pad popped up out of it's space, I knew I was dealing with a swelling battery.

My Fix

Easy as pie! The 54-bit driver kit is a very solid set with great build quality. Being Canadian shipping cost me almost as much as the kit but I know it will last me a long time

My Advice

Check the maximum amperage for your device :)

My Problem

Front glass was shattered after a drop. Touch still worked but was annoying.

My Fix

Followed the guide and repair was easy. Some screws inside were missing from a bad repair job before so it took a little longer than expected but everything went smoothly.

My Advice

Be sure to watch out for the digitizer cable getting folded up behind the screen and the lower antenna cable getting jammed behind the logicboard.

My Problem

The whole digitalizer was shattered

My Fix

It took me like an hour because I didn't need to use the I opener due the fact it was so badly cracked.

My Advice

Take your time and don't scratch the lcd

My Problem

No problem with the right tool; ... repaired loose screw on my eye glass hinge. --- Just the most magnificent micro bits tool 'chest', as it might well be called in the beautiful box. ---

My Fix

I was teaching a 14 year old piano student of mine and one of the lenses fell out of my glasses. I asked him if he had a set of jeweler's screwdrivers (that's what we used to call them) Kerry had not heard them referred to that way, but being a "young" techy adolescent, after my decsciption of what I was looking for, he pulled out his tool kit for his computer and other devises, which was his IFixit 54 Bit Driver it, and after asking him where he got it, I went to the IFixit WebSite and ordered it. It arrived in 3 days by Priority mail (a record, for anything I've ever ordered by mail)

My Advice

In addition to the huge supply of 'micro' took bits and accompanying accessaries, the magnetic box lid closer plugs in ingenious.

My Problem

my phone is quickly unload....

My Fix

easy with your guide!!!

20 min and I have a new phone !!! Well done !!

My Advice

Read the guide and do the same process...easy , quick and let's go for have a new smart phone !!!

Thanks a lot to bypass Apple strategies ifixit !!!

Fix myself and save money $$$