iPhone 8 Plus Parts - Page 2

Replace the mesh covers for the speaker, vent, and microphone openings. Mesh covers are part of the water and dust ingress protection for the phone.

Replace a internal inductive charging coil inside the rear case compatible with the model #A1864, A1897, A1898 iPhone 8 Plus. Fix issues with your phone’s cordless charging.

Replace a broken or scratched rear panel with this new blank aftermarket rear panel.

Replace the custom cut adhesive strips that secure the battery to the rear case compatible with the A1864, A1897, A1898 model iPhone 8 Plus smartphone.

Replace a front glass digitizer panel and LCD display compatible with the iPhone 8 Plus model A1864, A1897, A1898.

This test cable simplifies connecting multiple lightning connector assemblies compatible with the iPhone 8 or iPhone 8 Plus. Indispensable to anyone who makes multiple iPhone 8 or iPhone 8 Plus repairs.

Replace the clear plastic frame for the proximity sensor on the back of the display assembly of your smartphone.

Replace the wireless charging antenna cable connector on the logic board compatible with the iPhone 8 and 8 Plus. Installing this part requires micro-soldering.

Replace a damaged or corroded battery cable connector on the logic board of an iPhone 8, iPhone 8 Plus, or iPhone X. This part requires microsoldering.

Replace a missing or bent metal bracket securing the home button assembly to the display assembly in your smartphone.

Replace a scratched or dented aluminum and glass rear case.

Replace a bent or missing metal bracket that secures the battery connector and two lower display cable connectors to the logic board. This part is compatible with an iPhone 8 Plus.

Replace a rear panel and camera lens cover with this new blank aftermarket rear panel assembly compatible with the iPhone 8 Plus.

Replace a stripped or missing tri-point Y000 screw securing the display shield plate to the back of the display assembly.

Replace a stripped or missing screw in your smartphone.

Replace a bare logic board (with no components) compatible with iPhone 8 Plus. This is only the board to which all the surface soldered components would be mounted.

Replace a stripped or missing bottom exterior screw.

Replace the antenna cable connector on the logic board compatible with iPhone 8 or 8 Plus. This part requires micro-soldering.

5W adapter used for iPhones and iPods.

Replace a LCD data choke on the logic board of an iPhone or iPad. This part requires micro soldering.