Vehicle Case Components - Page 2

Replace a damaged or burned out propeller motor for a standard model DJI Phantom 4 drone. Part number BC.PT.A00343.S

Replace one or a pair of damaged quick release propellers for a DJI Inspire 2 drone. Set includes one clockwise (CW) propeller and one counterclockwise (CCW) propeller. Part number CP.BX.000180

Replace one or a pair of damaged quick release high-altitude propellers. One clockwise (CW) propeller and one counterclockwise (CCW) propeller.

Replace a damaged camera mount bracket for a DJI Inspire 2 drone. This mount includes the camera socket and connector, camera cables, and three elastic bumpers. Part number CP.BX.S00058

Replace one or all four mounting plates for the propellers on a DJI Inspire 2 drone. This set includes four mounts, 2 counterclockwise and 2 clockwise mounts. Part number CP.BX.S00057

Replace a damaged or missing plastic cable cover panel for a DJI Inspire 2 drone. Part number CP.BX.S00056

Replace one or all four antenna covers on the landing legs compatible with the DJI Inspire 2 drone. Part number CP.BX.S00055. Includes 4 Plastic Antenna Covers and 16 Mount Screws.

Replace a damaged or malfunctioning middle frame assembly for a DJI Inspire 2 drone. This assembly includes the motor and screw drive that raises and lowers the motor arms between landing and flight positions. Part number CP.BX.S00054

Replace a damaged top section of the main body for a DJI Inspire 2 drone. Part number CP.BX.S00053

Replace a damaged bottom section of the main body for a DJI Inspire 2 drone. The assembly includes the the downward vision system and two cooling fans. Part number CP.BX.S00051

Replace one damaged landing gear leg for a DJI Inspire 2 drone. There are four landing legs on the drone. Part number CP.BX.S00049

Replace a damaged plastic cover for the GPS module on the top of a DJI Inspire 2 drone. Part number CP.BX.S00046

Replace one metal landing gear bracket on the underside of a motor arm on a DJI Inspire 2 drone. Each end of both arms has one of these landing gear mounts. Part number CP.BX.S00045

Replace a damaged right side motor arm assembly for a DJI Inspire 2 drone. Part number CP.BX.S00043

Replace a damaged left side motor arm assembly for a DJI Inspire 2 drone. Part number CP.BX.S00042

Replace a damaged or burned out clockwise (CW) propeller motor for a DJI Inspire 2 drone. Part number CP.BX.S00039

Replace a damaged or burned out counterclockwise (CCW) propeller motor for a DJI Inspire 2 drone. Part number CP.BX.S00038

Replace one or both of the smaller struts on the motor arms of a DJI Inspire 2 drone. Part number CP.BX.S00037

Replace a damaged front metal nose cover for a DJI Inspire 2 drone. Part number CP.BX.S00036

Replace a plastic lower case half compatible with the DJI Phantom 4 Pro Remote Controller with Built-In Screen. The bottom shell includes gray rubber panels, metal handle/leg, and the C1 and C2 switches. Part #CP.PT.S00103.

Replace a plastic cover for the HDMI circuit board on the bottom of a DJI Phantom 4 Pro Remote Controller with Built-In Screen. Part number CP.PT.S00101

Replace a display compatible for the DJI Phantom 4 Pro Remote Controller with Built-In Screen. Part #CP.PT.S00099. Includes the 5.5" FHD Screen, Display Rear Case, Mount Arm, Display Cable.

Replace a plastic upper case with antennas, buttons, dials, and speaker installed. Part #CP.PT.S00095.

Replace a damaged or missing plastic cover for the interface circuit board on the bottom of a DJI Phantom 4 Pro Remote Controller. Part number CP.PT.S00094