Phone Parts - Page 32

Replace a damaged, dirty, or corroded USB-C charging daughter board assembly for a Motorola Moto G Stylus 4G (2023) smartphone.

Use these custom adhesive strips to secure a battery to the case of a Moto G Stylus 4G (2023) smartphone.

Replace the adhesive film that secures the rear cover panel to the case of a Motorola Moto G Stylus 4G (2023) smartphone.

This custom cut adhesive film secures the back panel to the case in a 2022 Motorola Moto G Stylus 5G smartphone.

Replace a torn cable or worn out internal switch for the side buttons in a 2022 model Motorola Moto G 5G smartphone.

This custom cut adhesive film secures the vibrator motor to the case in a 2022 model XT2213 Moto G 5G smartphone.

This custom cut adhesive film secures the board cable in a 2022 model XT2213 Moto G 5G smartphone.

Replace a front glass digitizer screen compatible with a 2022 model Motorola Moto G 5G smartphone. Features a 6.5 inch 720 x 1600 pixel IPS LCD Display.

Replace a front glass digitizer screen compatible with a 2021 Non-Verizon model Moto G Power smartphone. Features a 6.6 inch 720 x 1600 pixel IPS LCD Display.

This custom cut adhesive film set secures the front glass digitizer screen and display to the front frame and bezel assembly of your XT1671 or XT1676 model Moto G5 smartphone.

Replace the adhesive holding the metal bezel for the rear-facing camera compatible with the Samsung Galaxy Note8 smartphone.

Replace a dead or damaged EB-BJ700 battery in a 2015 model Samsung Galaxy J7 smartphone.

We live to share gadget guts with the world. Now you can show off the insides of your iPhone X with a new Insight iPhone Teardown Case.

Replace an earpiece speaker or sensor assembly compatible with the iPhone X model A1865, A1901, A1902. Includes the Flood Illuminator, Proximity Sensory, and Microphone.

Replace the external lens cover and its color matched bezel for the rear-facing camera compatible with the iPhone X.

Replace the adhesive foam gasket that fits between the loudspeaker and the speaker opening in the rear case compatible with iPhone X. This gasket helps seal liquid and dust out of the device.

Replace the adhesive backed foam gasket spacer on the loudspeaker connector in an iPhone X. Set of 5 pads.

Replace the adhesive backed foam spacer on the microphone that is part of the lightning connector assembly compatible with the iPhone X. Includes a set of 5 pads.

Fix problems with vibration alerts and haptic feedback with this replacement linear oscillating vibrator.

Replace a internal inductive charging coil inside the rear case compatible with the model #A1864, A1897, A1898 iPhone 8 Plus. Fix issues with your phone’s cordless charging.

Replace a lightning connector assembly compatible with the iPhone 8 Plus. Includes the flex cable, logic board connector, lightning connector socket, and two microphones.

Replace the custom cut adhesive strips that secure the battery to the rear case compatible with the A1864, A1897, A1898 model iPhone 8 Plus smartphone.

Replace an external lens cover for the rear-facing camera compatible with the iPhone 8.

Replace the mesh covers for the speaker, vent, and microphone openings.